Behind License Plate Bracket Reversing Camera | CAM801
Small, discreet camera that has a bracket which is installed behind the number plate, leaving a small camera that "pops out" above the number plate.
Introducing our new and improved reverse camera concealed behind the number plate bracket! Unlike our previous models, this camera boasts advanced image sensor options, ensuring a higher quality picture. Its compact design, measuring just 22mm in depth and 18mm in height, makes it the perfect choice for those seeking a discreet and hassle-free installation.
The camera is ingeniously attached to a bracket that remains mostly hidden behind the number plate. You can secure it using screws, or for a seamless look, I recommend using adhesive sealant or robust tape like Scotch Red.
What sets this camera apart is its flexibility. The bracket can be slightly bent to adjust the viewing angle, allowing you to tilt it downwards or keep it straight for a rear-view perspective.
The reversing camera has guidelines super imposed to the picture. These can be removed by cutting a trigger loop near to the connector.
There are two options for the connector type depending on what monitor display you plan to connect to. We have either RCA/Phono for people adding to a Stereo headunit eg Sony/Kenwood/Pioneer, or 4 pin aviation for people using a 4 pin monitor. Just be aware that after 60cm, the wiring contains non-waterproof components, so it must enter the vehicle body at this point.
We offer two specifications, one with a budget 1058 700tvl image sensor lens combo, and one with the premium 4089 700tvl quality all glass lens combo.
Rest assured, the camera is waterproof up to IP68 standards, ensuring reliable performance even in challenging weather conditions. With an approximate viewing angle of 150 degrees (diagonal), you'll have an extensive field of vision.
Operating on a 12V power supply, the camera is commonly connected to the reverse light for seamless integration. It delivers a vibrant and detailed color image thanks to its high-spec image sensor.
For more information on the camera's technical specifications, please refer to the details below. We are thrilled to offer this superior reverse camera solution, designed to enhance your driving experience with convenience and safety in mind.
PDF Instructions
We aim to provide as much information as possible to assist with both the installation and use of our equipment (something we here is very rare nowadays). If you require any further assistance with any aspect of the fitment then please contact us. Also, if you feel anything could be added to our instructions or a sticker produced for the box to assist in guidance, please let us know. We get better with your assistance.
 Click preview image to download the PDF file | General 4 Pin Camera Installation Guide This guide includes adapting the 4 pin reversing cameras to phono RCA in applications such as stereo headunits. |
Budget Option
- TV system: PAL
- Mirror image with parking line
- Optical format: 1/3"
- Effective Pixels: 976(H)*592(V)
- Resolution: 700TVL
- Horizontal view angle: 130 degree
- Scanning System: 2:1 Interlace
- Sync. System: Internal
- Minimum Illumination: 0.01 lux
- S/N Ratio: Better than 46dB
- Power Supply: DC12V
- Waterproof: IP68
- Operating Temperature: -30°C~80°C , RH95% MAX
- Storage Temperature: -40°C~85°C, RH95% MAX
- with two function loop wires:
white loop: cut= turns off parking lines
green loop: cut= display non-mirror images - Update grade harness extension cable, that could support better power harness, not burnt
Premium Option
- Image device:- PC4089 CMOS sensor
- Effective pixels: 976(H) x 592(V)
- Resolution: 700 TVL
- Selectable guidelines
- IP rating: Ip68
- Lens angle: 150° diagonal
- Minimum illumination 0.1 Lux
- Video output: 1.0VP-P.75Ohm
- Power supply: DC12V
- Operating Temperature: -20°C to +70°C
Mainland UK Shipping
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders. £3.95.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM). £6.50.
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM). £7.99.
Highlands and Islands UK Shipping
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Outside of the UK Shipping
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.