Peugeot Boxer Dual Lens Reverse & Rear View Camera for Brake Light 2006-Present - CAM1723TW
2-in-1 Dual Lens reversing and rear view camera for Peugeot Boxer vans built between 2006 and the present. Increase your safety and awareness with this attractive factory-look brake light reversing and rearview camera designed to retrofit your Peugeot Boxer. Buy from Reversing Cameras UK Ltd, trusted across many forums, groups and professional fitters.
Peugeot Boxer Brake Light Reversing + Rear View Camera to fit 2006 - Present Vans
Our top-spec dual reversing and rear view camera fits Peugeot Boxer brake light on vans built between 2006 and the present. Experience the highest image quality from the 4089 700tvl sensors fitted, high-performance night vision, safely drive with the always on rear view camera with the 80 degree lens, and reverse with ease with the 130-degree wide angle lens camera. You can expect :
- Top Spec Image Quality - Both cameras are fitted with our favourite image sensor and lens combination - the 4089 700tvl image sensor, coupled with the 4 layer quality composite glass lens.
- Excellent Night Vision for the Reversing Camera - With an external lens, a premium modern CMOS high resolution image sensor, and externally separated IR LEDs you can expect a very good night time image. The rear view camera looking further back doesn't have IR LED's since these are not effective beyond 5-10 metres i.e. close up.
- Durable Build Quality - We rarely hear of one of our brake light reversing cameras failing. This is because we insist on using who we consider to be the best brake light camera manufacturer that exists today.
- Easy Fit - Simply unscrew the old brake light off your van. Press in the 3 tabs on the top and 3 tabs at the bottom to release the light strip. Transplant this strip in to the new brake light reversing camera. Fit the new brake light camera on to the vehicle with the original two screws. See instructions further down - both video and picture guide for more information.
- Factory Fit Look - This retro fit brake light rear view camera has been made to appear as close to factory look as possible.
- Reversing Safety, and Stress Free Parking - With the 130 degree wide angle lens and the quality image sensor installed, you can see obstacles around the rear of your van or motorhome conversion van as you manoeuvre around them. Reduce the likelihood of damage, or injury to others with the Peugeot Boxer brake light reverse parking camera.
- Always on Rear View Camera for General Road Safety - With the 80 degree lens you can view following traffic as you drive. This means the system is supporting your safe journey 100% of the drive, instead of just the 1-2% of the drive that you are reversing.
- Optional Guidelines to Assist Parking - The Peugeot Boxer brake light reversing camera comes with coloured parking guidelines turned on as standard. These can be removed via the trigger wire loop next to the plug.
Cable length and adaptor cable options
You can add a discounted extension cable to connect between the reversing camera and the monitor. If your monitor uses RCA Phono connectors, then please select the discounted adaptor set option to give you every connector you will require (TWO SUPPLIED - One for each channel). See photo below for more details of each bundle. We usually recommend using the multipin extension cable to the front, even when using an RCA phono monitor, because this helps avoid any CANBUS issues. See the PDF fitting advice guide further down the listing to see the wiring layout. If you would prefer to adapt to RCA at the rear, please see our RCA Phono extension cable category.
Fitting instructions and advice
 Click preview image to download the PDF file | General 4 Pin Camera Installation Guide This guide includes adapting the 4 pin reversing cameras to phono RCA in applications such as stereo headunits. |
Driving camera (upper camera)
Sensor: 1/3 PC4089 CMOS
Effective Pixels: 976(H) x 592(V)
TV line: 700 TVL
TV system: NTSC
Lens: 2.6mm
Min illumination: 0.1 LUX
Waterproof: IP68
View angle: V 65 degrees, H 80 degrees D 105 degrees
Camera lens adjustment: 20 degrees up and down
Voltage: 12 volts
Current consumption: 150mA
Operating temperature: -20 to 70 degrees C
Certificates: FCC, CE, E-mark, RoHS
Connector: 4 pin aviation
Reversing camera (lower camera)
Sensor: 1/3 PC4089 CMOS
Effective Pixels: 976(H) x 592(V)
TV line: 700 TVL
TV system: NTSC
Lens: 1.9mm
Min illumination: 0.0 LUX (IR LED on)
IR LEDs: 8 pcs
Night vision: 10m
Waterproof: IP68
View angle: V 85 degrees, H 130 degrees D 160 degrees
Camera lens adjustment: 20 degrees up and down
Voltage: 12 volts
Current consumption: 150mA
Operating temperature: -20 to 70 degrees C
Guideline: Optional (some have a trigger wire to select)
Certificates: FCC, CE, E-mark, RoHS
Connector: 4 pin aviation
Mainland UK Shipping
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM).
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM).
Highlands and Islands UK Shipping
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Outside of the UK Shipping
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.
