W447 Mercedes Vito Reverse Camera to fit 2016+ Tail Gate Lift Door Brake Light | CAM440
Fit the best quality OEM look Brake Light Reversing Camera to your 2016+ W447 Mercedes Vito with the Tail Lift / Tail Gate Doors. Super wide 170 degree viewing angle, premium PC4089 700tvl image sensor, 2 year guarantee and support from the forum favourites (REVCAMUK). Retains original wiper jet, looks factory fit, adjustable tilt angle. Order one of our top specification Mercedes Vito Reversing Cameras today.
Mercedes Vito Tail Gate Lift Door Reversing Camera to fit the Brake Light on 2016 - Present Vans
Our top-spec brake light reversing camera fits Mercedes Vito Tailgate vans built between 2016 and present. Experience the highest image quality from the 4089 700tvl sensors fitted, and reverse safely with the extra wide 170-degree wide angle lens. You can expect :
This brake light reversing camera fits the following vans:
Mercedes Vito (Tail Gate Lift Door W447) 2016 - Present
This camera has the following advantages :
Top Image Quality - The Mercedes Vito brake light reverse camera is fitted with our favourite image sensor and lens combination - the 4089 700tvl image sensor, coupled with the 4 layer quality composite glass lens.
Durable Build Quality - We rarely hear of one of our brake light reversing cameras failing. This is because we insist on using who we consider to be the best brake light camera manufacturer that exists today.
Factory Fit Look - This reverse camera is designed to retain the factory look of your Vito van, with the new brake light camera fitting in the same manner as the OEM brake light.
Uses Original Power Loom for Brake Light - No wiring required to allow the brake light to operate normally. Simply unplug the connector from the old brake light and insert in to the new brake light camera.
Reversing Safety, and Stress Free Parking - With the 170 degree lens and the quality image sensor installed, you can see obstacles around the rear of your van or motorhome conversion van as you manoeuvre around them. Reduce the likelihood of damage, or injury to others.
2 Year Guarantee - We believe that our brake light reversing cameras come from the best factory, the factory is so sure of their own product that they fully support our highly respected two year guarantee. We find the fault rate very low from them, but should anything happen in your first two years of ownership, we will provide a replacement.
Optional Guidelines to Assist Parking - The Mercedes Vito brake light reversing camera has coloured parking guidelines turned on as standard. These can be removed via the trigger wire loop next to the plug.
Retains Factory Washer Jet - The new brake light camera will have a moulded cut-out to fit the original jet wash for the washers that was in the OEM brake light.
Cable length and adaptor cable options
You can add a discounted extension cable to connect between the reversing camera and the monitor. If your monitor uses an RCA Phono connector, then please select the discounted adaptor set option to give you every connector you will require. See photo below for more details. We usually recommend using 4 pin extension cable to the front, even when using an RCA phono monitor, because this helps avoid any CANBUS issues. See the PDF fitting advice guide further down the listing to see the wiring layout. If you would prefer to adapt to RCA at the rear, please see our RCA Phono extension cable category.
Fitting instructions and advice
 Click preview image to download the PDF file | General 4 Pin Camera Installation Guide This guide includes adapting the 4 pin reversing cameras to phono RCA in applications such as stereo headunits. |
Technical Specification
Image Sensor : 1/3" colour Super CMOS
Effective Pixels : 976(H) x 592(V)
Resolution : 700TVL
Minimum illuminations : 0.1 Lux (day)
Lens Angle : 170 degrees
Waterproof : IP69K
AGC : Auto
Signal to noise ratio : Better than 48dB
White balance : Auto
Electronic Shutter : Auto
Power Supply : DC12V
Operating Temperature : -20C to 70C RH95% MAX
Storage Temperature : -40C to 80C RH95% MAX
Mainland UK Shipping
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM).
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM).
Highlands and Islands UK Shipping
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Outside of the UK Shipping
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.
