About our Dual Lens Rear View + Reversing Camera to fit 2006-Present Fiat Ducato, Peugeot Boxer, Citroen Relay Vans. Now also fits 2022+ Vauxhall Movano

This twin view brake light reversing + rear view camera has been designed to increase your safety for your entire journey. As well as giving you greater rear visibility when reversing, this brake light housing has a second camera built in to view back down the road as an always on driving rear view camera. All of this whilst maintaining the factory appearance of your van. Easy to install, high resolution, great image quality, durable, supported with a two year guarantee from the reversing camera specialists. 

This brake light rear view + reversing camera fits the following vans:

Fiat Ducato 2006 - Present

Peugeot Boxer 2006 - Present

Citroen Relay 2006 - Present

Vauxhall Movano 2022 - Present

This camera has the following advantages :

Great Image Quality - We don't settle for the base spec when it comes to this brake light camera. We have the 4089 700tvl image sensors fitted, which are paired with a top quality all-glass composite lens. The image sensor is one of the most important components for ensuring a colourful, sharp, and high dynamic image. We select all glass lenses instead of cheaper glass-plastic composites, because over time plastic containing lenses would fade from UV damage. No such issue with our all-glass lenses. 

IP68 Waterproof Protection - This reversing camera is rated to IP68 water/dust ingress protection. This will keep the camera protected in even the worst wet and stormy weather the Great British weather can throw at it, or indeed on your trips across the continent.

130°(H) / 160°(D) Ultra Wide Angle (Reversing Camera) - Due to the external lens fitted to this camera, you are able to have a greater field of view, which is very helpful when reversing. External lenses can achieve wider field of view compared to those mounted behind a glass cover.

80°(H) / 105°(D) Semi-Narrow Angle (Rear View Camera) - When it comes to rear view cameras, you will appreciate the field of view being less wide angle. This is physically the most narrow angle lens we could get fitted in to the small camera body used for this camera. In and ideal world we would fit a 6mm or 8mm lens (45-60 degree) for rear view, those lenses are far too big for a brake light camera. The rear view camera is a great compromise and manages to achieve an 80 degree field of view, whilst maintaining it's small size.

2 Year Guarantee - We believe that our brake light reversing cameras come from the best factory, the factory is so sure of their own product that they fully support our highly respected two year guarantee. We find the fault rate very low from them, but should anything happen in your first two years of ownership, we will provide a replacement.

IR Night Vision - The downward facing camera is fitted with IR LED's that activate when it becomes dark. IR light is beyond the visible spectrum of the human eye, so you won't be blinding anyone behind you with light. The camera will see it, and use it to see obstacles behind your van when it is dark. Another bonus about our external lens is not having the IR LED's behind a glass lens cover. This means you get a really good contrast at night time, with none of the haziness sometimes seen with glass lens cover versions.

Maintains a Tidy Factory Look - This brake light reverse camera was designed to fit perfectly where the OEM brake light used to be. If you didn't tell anyone, most people would assume it was a factory addition. The brake light works just as well as the original, in fact you are actually using the original light strip.

Increases Safety Whilst Driving and Reversing - With two cameras present, you will increase your awareness of what is to the rear of your vehicle, whether you are driving forward, or reversing backwards. The rear view camera can be left on all the time whilst you drive, then swap to the downward facing camera when you go in to reverse.

Easy to Fit - Simply remove the two screws from the original van brake light. Unplug and remove the brake light from the van. Press the 3 top tabs, and 3 bottom tabs to release the brake light strip. Insert in to the new brake light reversing camera - clicks in to the same 3 tabs top/bottom. Fit the new brake light camera back up with the 2x original screws removed earlier. Please see either our image, or our YouTube video below to see the light strip transplanting process. A hardcopy of the instructions are sent with your order.