Ford Transit Rear View + Reversing Camera for Brake Light 2014 - Present | CAM1733TW

Dual Lens Reversing + Rear View Camera to fit 2014 to present Ford Transit/Tourneo/Tailgate vans. Two Year Guarantee. 2x top quality 4089 700tvl cameras built in. Factory look brake light camera. Twin signal single cable + adaptors to 2x 4 pin. Optional discounted 4 Pin to RCA adaptor sets available. Easy to install. Night vision IR LED's.

  • £150
  • including VAT
Qty:  
In stock (10 items available)

About our Dual Lens Rear View + Reversing Camera to fit 2014-Present Ford Transit Mk8, Tourneo, and Custom Tailgate Models

This twin view brake light reversing + rear view camera has been designed to increase your safety for your entire journey. As well as giving you greater rear visibility when reversing, this brake light housing has a second camera built in to view back down the road as an always on driving rear view camera. All of this whilst maintaining the factory appearance of your van. Easy to install, high resolution, great image quality, durable, supported with a two year guarantee from the reversing camera specialists. 

This brake light rear view + reversing camera fits the following vans:

Ford Transit Mk8 2014 - Present

Ford Transit Custom Tailgate 2014 - Present

Ford Tourneo Custom 2014 - Present

This camera has the following advantages :

Great Image Quality - We don't settle for the base spec when it comes to this brake light camera. We have the 4089 700tvl image sensors fitted, which are paired with a top quality all-glass composite lens. The image sensor is one of the most important components for ensuring a colourful, sharp, and high dynamic image. We select all glass lenses instead of cheaper glass-plastic composites, because over time plastic containing lenses would fade from UV damage. No such issue with our all-glass lenses. 

IP68 Waterproof Protection - This reversing camera is rated to IP68 water/dust ingress protection. This will keep the camera protected in even the worst wet and stormy weather the Great British weather can throw at it, or indeed on your trips across the continent.

130°(H) / 160°(D) Ultra Wide Angle (Reversing Camera) - Due to the external lens fitted to this camera, you are able to have a greater field of view, which is very helpful when reversing. External lenses can achieve wider field of view compared to those mounted behind a glass cover.

80°(H) / 105°(D) Semi-Narrow Angle (Rear View Camera) - When it comes to rear view cameras, you will appreciate the field of view being less wide angle. This is physically the most narrow angle lens we could get fitted in to the small camera body used for this camera. In and ideal world we would fit a 6mm or 8mm lens (45-60 degree) for rear view, those lenses are far too big for a brake light camera. The rear view camera is a great compromise and manages to achieve an 80 degree field of view, whilst maintaining it's small size.

2 Year Guarantee - We believe that our brake light reversing cameras come from the best factory, the factory is so sure of their own product that they fully support our highly respected two year guarantee. We find the fault rate very low from them, but should anything happen in your first two years of ownership, we will provide a replacement.

IR Night Vision - The downward facing camera is fitted with IR LED's that activate when it becomes dark. IR light is beyond the visible spectrum of the human eye, so you won't be blinding anyone behind you with light. The camera will see it, and use it to see obstacles behind your van when it is dark. Another bonus about our external lens is not having the IR LED's behind a glass lens cover. This means you get a really good contrast at night time, with none of the haziness sometimes seen with glass lens cover versions.

Maintains a Tidy Factory Look - This brake light reverse camera was designed to fit perfectly where the OEM brake light used to be. If you didn't tell anyone, most people would assume it was a factory addition. The brake light works just as well as the original.

Increases Safety Whilst Driving and Reversing - With two cameras present, you will increase your awareness of what is to the rear of your vehicle, whether you are driving forward, or reversing backwards. The rear view camera can be left on all the time whilst you drive, then swap to the downward facing camera when you go in to reverse.

PDF Instructions

We aim to provide as much information as possible to assist with both the installation and use of our equipment (something we here is very rare nowadays). If you require any further assistance with any aspect of the fitment then please contact us. Also, if you feel anything could be added to our instructions or a sticker produced for the box to assist in guidance, please let us know. We get better with your assistance. 


Click preview image to download the PDF file
General 4 Pin Camera Installation Guide
This guide includes adapting the 4 pin reversing cameras to phono RCA in applications such as stereo head units. 

Technical Specification

Please find the technical specifications of the dual lens brake light reversing camera below :

Driving camera (upper camera)

Sensor: 1/3 PC4089 CMOS
Effective Pixels: 976(H) x 592(V)
TV line: 700 TVL
TV system: NTSC
Lens: 2.6mm
Min illumination: 0.1 LUX
Waterproof: IP68
View angle: V 65 degrees, H 80 degrees D 105 degrees
Camera lens adjustment: 20 degrees up and down
Voltage: 12 volts
Current consumption: 150mA
Operating temperature: -20 to 70 degrees C
Certificates: FCC, CE, E-mark, RoHS
Connector: 4 pin aviation

Reversing camera (lower camera)

Sensor: 1/3 PC4089 CMOS
Effective Pixels: 976(H) x 592(V)
TV line: 700 TVL
TV system: NTSC
Lens: 1.9mm
Min illumination: 0.0 LUX (IR LED on)
IR LEDs: 8 pcs
Night vision: 10m
Waterproof: IP68
View angle: V 85 degrees, H 130 degrees D 160 degrees
Camera lens adjustment: 20 degrees up and down
Voltage: 12 volts
Current consumption: 150mA
Operating temperature: -20 to 70 degrees C
Guideline: Optional (some have a trigger wire to select)
Certificates: FCC, CE, E-mark, RoHS
Connector: 4 pin aviation

Mainland UK Shipping

We have three postage options to select from during checkout (on larger items eg kits there will be two options):

Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service.  They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders. 

DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM). 

DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM). 

Highlands and Islands UK Shipping

We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.

Outside of the UK Shipping

We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.  

We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.

60 day "Change of Mind" policy

We understand that for whatever reason you may need to return your purchase.  We provide a 60 day opportunity for you to do just that.  Simply give us an email or a phone call to let us know it is due back.  You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order.  We recommend getting a signed for or proof of postage when posting back to us.

All we ask is that you return the items in the condition they were sent in, with the packaging present.  You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.