Mercedes Sprinter and VW Crafter Reverse Parking Camera Kit with 7" Mirror Monitor for Brake Light

Our 7" rear view mirror monitor + brake light reversing camera kit to fit the 2006 to Present Mercedes Sprinter vans, as well as 2006-2017 VW Volkswagen Crafter vans. Option of either clip over existing mirror, or attach direct to original windscreen fitment. Two year guarantee, lifetime support, great quality components, high resolution image sensors and LCD panel, fast dispatch and increased safety whilst driving and parking.

This brake light rear view + reversing camera fits the following vans:

Mercedes Sprinter 2006 - Present

VW Volkswagen Crafter 2006 - 2017

This reversing and rear view camera kit has the following advantages :

Great Camera Image Quality - We don't settle for the base spec when it comes to this brake light camera. We have the 4089 700tvl image sensors fitted, which are paired with a top quality all-glass composite lens. The image sensor is one of the most important components for ensuring a colourful, sharp, and high dynamic image. We select all glass lenses instead of cheaper glass-plastic composites, because over time plastic containing lenses would fade from UV damage. No such issue with our all-glass lenses. 

High Resolution Monitor Image Quality - Our 7 inch mirror monitor display gives a good quality image thanks to it's 800x480 pixel digital hi-res LCD panel.

Most Popular Location for Fitting a Monitor - The position of the interior mirror is where we naturally look when we wish to see what is behind us.  

IP68 Waterproof Protection - This reversing camera is rated to IP68 water/dust ingress protection. This will keep the camera protected in even the worst wet and stormy weather the Great British weather can throw at it, or indeed on your trips across the continent.

130°(H) / 160°(D) Ultra Wide Angle (Reversing Camera) - Due to the external lens fitted to this camera, you are able to have a greater field of view, which is very helpful when reversing. External lenses can achieve wider field of view compared to those mounted behind a glass cover.

80°(H) / 105°(D) Semi-Narrow Angle (Rear View Camera) - When it comes to rear view cameras, you will appreciate the field of view being less wide angle. This is physically the most narrow angle lens we could get fitted in to the small camera body used for this camera. In and ideal world we would fit a 6mm or 8mm lens (45-60 degree) for rear view, those lenses are far too big for a brake light camera. The rear view camera is a great compromise and manages to achieve an 80 degree field of view, whilst maintaining it's small size.

2 Year Guarantee - We believe that our brake light reversing cameras come from the best factory, the factory is so sure of their own product that they fully support our highly respected two year guarantee. We find the fault rate very low from them, but should anything happen in your first two years of ownership, we will provide a replacement. This stands true for our extra reliable monitors and cabling in the kit.

IR Night Vision - The downward facing camera is fitted with IR LED's that activate when it becomes dark. IR light is beyond the visible spectrum of the human eye, so you won't be blinding anyone behind you with light. The camera will see it, and use it to see obstacles behind your van when it is dark. Another bonus about our external lens is not having the IR LED's behind a glass lens cover. This means you get a really good contrast at night time, with none of the haziness sometimes seen with glass lens cover versions.

Maintains a Tidy Factory Look - This brake light reverse camera was designed to fit perfectly where the OEM brake light used to be. If you didn't tell anyone, most people would assume it was a factory addition. The brake light works just as well as the original.

Increases Safety Whilst Driving and Reversing - With two cameras present, you will increase your awareness of what is to the rear of your vehicle, whether you are driving forward, or reversing backwards. The rear view camera can be left on all the time whilst you drive, then swap to the downward facing camera when you go in to reverse.

Choose your preferred mirror monitor mounting option :

• Have a mirror? Choose our clip-over mirror option, we will supply you with a rear view mirror monitor that clips over your existing interior mirror.

• Don't have a mirror but have a metal button on the windscreen for one? Choose our ACCMB5 swan neck bracket option, we will supply you with our swan neck bracket compatible rear view mirror monitor + a swan neck bracket to fit to the windscreen button/stub/metal plate commonly found on most VW Crafter and Mercedes Sprinter vans.

• Don't have a mirror and don't have a metal button on the windscreen? Choose our ACCMB2 + Button + Glue option, we will supply you with the bracket compatible monitor, a Ford Button to bond to the windscreen, Loctite 319 windscreen button adhesive to bond the button up, as well as full instructions on how to mount a windscreen button with Loctite 319 adhesive. We have researched videos, reviews, and manufacturer recommendations to provide the best instructions available to get the job done correct, first time. 

Installation and Power Options:

• Easy installation with various power options that plug in to a socket on the monitors wiring harness/loom.
• Single power connection powers the entire system.
• Standard hardwiring ALWAYS included even when adding the additional connector options.
• Choose a lighter plug for the easiest plug and play solution. Some customers order this just for testing purposes before using one of our hardwiring options (fuse tap or bare wire) afterwards.
• Choose one of our fuse taps for an easy hard wire installation. We have had them designed so that one end plugs in to the monitor power socket on the end of the wiring harness, whilst on the other side of the 200cm lead has a mini blade or a standard blade fuse tap aka piggyback fuse holder, as well as a chassis earth/ground terminal fixing (find a screw/bolt connected to bare chassis and fix to this). See our downloadable PDF instructions on how to install a fuse tap/piggyback fuse holder to your vehicles fusebox.

For more information including main reversing camera kit instructions, and monitor instructions, please click the tab for PDF instructions. If you would like any information/questions that may not be present, please contact us.