2x Black Sony CCD Bracket Horsebox / Agricultural Monitoring + Reversing Camera Kit with 7" Heavy Duty Monitor | PM82B-SD
Our two-camera kit includes two good-quality white stainless steel bracket monitoring/reversing cameras coupled with a 7" LCD panel display monitor. We usually supply these to people who plan to use them on horseboxes, using one camera to check on the horses' welfare inside the horse area and one camera to reverse.
2x Sony CCD Black Bracket Reversing + Horsebox Monitoring Camera with 7" Heavy Duty Monitor System
Our very much respected reversing camera kit consisting of our 3 channel capable heavy duty dashboard monitor. Heavy duty because of the side mounting U bracket, as well as the proven durability of the monitor in some very tough applications on off road vehicles, agricultural machinery and even monster trucks!
Supplied with two good quality bracket reversing camera, with the bracket made from stainless steel to prevent rusting seen on cameras supplied elsewhere. The camera is produced by a factory we trust immensely for quality. We have had the very respected 1/3" Sony CCD 700TVL image sensors installed, to produce a very detailed view of the road/surroundings both day and night. Fitted with a wide angle lens to provide 120 degrees field of view.
Great Image Quality - You can expect a colourful, high resolution image in the day, plus a good quality image at night hanks to the installed 1/3" Sony CCD 700tvl image sensors in both cameras.
IR Night Vision LED's - Multiple IR LED's provide the camera with useable light when it gets dark. This light is not visible to the human eye, so you won't be blinding people behind you, but it will be visible to the camera to help you avoid obstacles at night.
Painted Stainless Steel Bracket - To prevent rust, we have fitted this camera with a white painted stainless steel bracket. Painting stainless steel is costly and difficult, which is why it is still rare to see on many competitor products. But since we swapped over more than a decade ago, we never have any of our customers asking to replace a rusty, broken bracket.
Horizontal or Vertical Mounting - This reverse camera can either be mounted on a horizontal surface, or a vertical rear wall. This camera is popular with a multitude of different vehicle types including vans, HGV/LGV, Agricultural, Motorhomes, and even tanks/monster trucks/Santa's sleigh.
Increased Reversing Safety - Most importantly this reversing camera helps to improve reversing safety by helping to reduce blind spots to the rear of the vehicle.
IP68 Waterproof Rating - Rated to withstand even the worst weather the Great British Isles can throw at it.
Bright High Resolution Display - This monitor is fitted with a good quality LED backlit 800x480 high resolution digital LCD panel. In this business numbers tend to mean little, two monitors with the same technical description can have completely different performance to each other. Rest assured that this monitor is one of the best for image performance in the standard definition range. Feel confident ordering one today with our 60 days change of mind policy.
Monitor Auto-Dim Function - This monitor is built with a light sensor that detects how bright the cabin is. This means that when you drive through a tunnel, or start driving at night, the monitor will automatically adjust the brightness of itself to reduce glare to the driver.
Works on 12V and 24V Vehicles - The monitor can work on both 12V vehicles e.g. Motorhomes and Vans, as well as 24V vehicles e.g. HGV, LGV, and Trucks. The monitor can take up to 32V and regulate the output to the cameras down to 12V.
Deep Removeable Sunshade - To reduce the glare of sunlight on to the display, the monitor is supplied with a deep sunshade. This can be added and removed according to your preference. Some people choose not to install this, especially if they are mounting high up on the ceiling.
Two Year Guarantee - We are very confident in the build quality of our products, which is why the kit comes with a two year guarantee. In the unlikely event any fault shows itself in this time, we will replace or repair. Even outside of this period of time, we are usually able to offer a low cost monitor repair service/spare cameras to keep the system working in tip top condition. Something that is very rare in the throw away society of today.
Various Bracket Options (see tab) - The standard U Bracket can either be mounted down on to a flat piece of dashboard area, or you can invert the bracket and have it hanging from the ceiling. The monitor also has a rear channel that is designed to fit any of our range of stand style monitor brackets. Add one discounted bracket by using the drop down menu on this listing. For more details click on the monitor brackets tab.
Multiple Cable Length Options - We produce our own bundles from our favourite factories. We combine the best monitor factories, with the best reversing camera factories, and then link it all up with pure copper extension cables from our favourite cable manufacturer. This means we are able to offer customisation such as different length extension cables.
Multiple Power Options Including Lighter and Fuse Taps (see tab) - We want to make wiring your new reverse camera system in as simple as possible. To this end, we offer a few additional options for powering the system up. As the monitor powers the camera down the all-in-one screw locking cable, the power supply you provide the monitor will in turn supply the camera. We always provide the standard hardwiring (a simple red and black wire to connect), but you are also able to add fuse taps and lighter plugs that link to the DC socket on the monitor wiring. Our fuse taps are not your bog standard crimp on type, they were designed by us and have 200cm leads with a fuse tap on the red wire, and an earth terminal attached to the black wire. Hardwiring with no crimps/soldering. For more details click on the power options tab.
For more information including instructions, please click the tab for PDF instructions. If you would like any information/questions that may not be present, please contact us.
Additional Monitor Bracket Options
To add a discounted price additional monitor bracket to your product bundle, please see the descriptions/photos below. We also have a YouTube video showing the various bracket options below.
ACC035 - "Butterfly" Bracket option
So called because the base looks like a pair of butterfly wings. Fitted with an adhesive pad on the base, peel the protective layer off and stick to your clean dashboard. Additional screws can be used if you feel it needs reinforcement. The square nut fits in to the channel of your monitor, whilst there is a screw to the rear of the bracket that will then screw in to the square washer until it locks the two together.
ACC041 Quick Release Bracket option
The quick release bracket is one of the most popular bracket options. The bracket has a removable mounting plate that attaches to the rear channel of the monitor. This plate can then slide in to the bracket that is mounted to the dashboard and locks. To release, simply pull back the thumb switch at the rear, then slide the monitor up and out. Our monitors have disconnect points around a foot away from the monitor to allow it to disconnect. A bracket that makes initial install a little quicker, as well as allowing more adjustability in positioning of the display. Adhesive pad base for sticking to clean dashboard with bendable feet.
ACC705B - Heavy Duty Rear Mount Bracket Option
The most sturdy of all of our rear mounted dash mounts, all metal design. Monitor slides on to the bracket, which has a rear adjustment rotational wheel to lock the monitor to the bracket. Self adhesive base, with bendable "feet" for curvy dashboards. You can add screws if required.
ACC038 - Suction Mount Bracket Option
Only designed for temporary mounting eg. moving a monitor from one vehicle to another. This bracket has strong suction, people are often shocked by how strong it is. We use these when we road test new monitors for temporary mounting. A ball joint allows for good adjustment to give the monitor the optimum viewing angle.
ACC20540 - "Banana" Ceiling Mount Swan Neck Bracket Option
The ceiling mount bracket is a very sturdy and adjustable bracket mount for the monitor in this kit. Two screws secure this to the ceiling or plastic trim of the vehicle. The other side attaches to the channel on the back of the monitor and secures with a twist of the locking wheel. Release the tension by turning the hand screw knob on the left to allow the ball joint to rotate clockwise and anticlockwise, or up/down/left/right. These have been a very popular option since they were introduced.
Power Connection Options
You have the option to add additional leads that plug in to a DC socket on the monitor wiring harness. You will always be supplied with the standard power wire, which gives you a red wire and a black wire to solder / crimp to a power supply.
On the drop down menus you will notice there are two options selectable. One to add a lighter plug, one for a fuse tap. Scroll down for details on each option.
Lighter Plug
Selecting this option adds an additional lighter plug lead - attaches to a socket on the end of the 300cm monitor wiring loom/harness. Some people order this option just to try out there new kit before hardwiring permanently.
Fuse Tap (Mini blade, Standard blade)
Selecting this option adds an additional easy-wire fuse tap lead with built in earth terminal connector.
We designed and had this product produced in 2023, and they have been very popular. We wanted to create something that meant our customers could hardwire a reversing camera system to their vehicle with ease and minimal tools. Fuse taps have already become popular for installing dash cams, so we wanted to make them more popular for reversing camera kits too.
Usually fuse taps have no earth terminal connector and require crimp tools to connect to your wiring - our easy wire fuse tap kits are different. They come supplied with 2M of twin wire (power + earth) attached. The wires can be pulled apart should you wish to earth to an area far from the fuse box.
Choose a fuse that's active when the ignition is on. Remove the original fuse and place it in the empty slot of the fuse tap. The correct rated fuse for the new camera system is supplied already installed in the correct slot. Install the fuse tap (with the two fuses fitted) in to the fuse box (where you removed the original fuse). Lastly, connect the earth terminal to a chassis bolt or screw (or add a new bolt/screw to secure it).
The mini blade is the most commonly seen fuse size on modern vehicles.
Standard blade used to be the most common fuse size installed, and is still commonly seen, even on very recent vehicles.
PDF Instructions
We aim to provide as much information as possible to assist with both the installation and use of our equipment (something we here is very rare nowadays). If you require any further assistance with any aspect of the fitment then please contact us. Also, if you feel anything could be added to our instructions or a sticker produced for the box to assist in guidance, please let us know. We get better with your assistance.
 Click preview image to download the PDF file | For all of our cabled reversing camera kits Our main 4 pin reversing camera kit instructions. We prefer 4 pin screw locking connector cables in our kits for numerous reasons (no canbus issues, stable voltage, ability for always on, reliability, and heavy duty connectors). This downloadable PDF file will give you all the advice you will need. Some of our cameras will come with extra specific guidance or manuals to help that specific install. |
If you are ordering the Mini Bade or Standard Blade Fuse Tap power option, then please see the further instruction sheet below dealing with this time saving connection method.
 | Instructions for fitting Fuse Taps / Piggyback fuse holders for power supply Our guide on how to correctly install a piggyback fuse holder tap to power a reversing camera system from the fuse box. |
Technical Specification
Vehicle Monitor/Display
7” Colour LCD screen
Power supply: 12V/24V
Power Consumption: 7.5W
Digital Screen Resolution: 800 x3(RGB)x480
3 Inputs
PAL/NTSC/AUTO
Full function Remote Control
Camera x2
Image Sensor :1/3 SONY CCD 960H 700TVL
TV System: PAL
Effective Pixels: 976*582
Minimum Illuminstion: 0.01 LUX
S/N Ratio: ≥48dB（AGC OFF）
Horizontal Resolution: 700 TV lines
Video Output:1.0vp-p,75Ohm
Backlight compensation: Auto
Vibration Rate: 4G
Working Temperature: -20℃ to 80℃ RH95% Max
Storage Temperature: -30℃ to 85℃ RH95% Max
Waterproof to Ip68
18 Infra red LEDs to provide night view (approx 5-10M effective range)
Stainless Steel Bracket (painted)
Mainland UK Shipping
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM).
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM).
Highlands and Islands UK Shipping
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Outside of the UK Shipping
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.