White Sony CCD Bracket Reversing Camera Kit with 7" Heavy Duty Monitor | PM81W-SD
Reverse camera system consisting of our 7-inch heavy-duty dash display, as well as a white-coloured stainless steel bracket reversing camera. The camera is fitted with a Sony CCD high-resolution image sensor, the two combined work well both night and day. We provide a 2-year guarantee, 60-day change of mind policy, and low-cost repairs outside of the guarantee period.
Sony CCD White Bracket Reversing Camera and 7" Heavy Duty Monitor System
Our very much respected reversing camera kit consisting of our 3 channel capable heavy duty dashboard monitor. Heavy duty because of the side mounting U bracket, as well as the proven durability of the monitor in some very tough applications on off road vehicles, agricultural machinery and even monster trucks!
Fitted with a good quality bracket reversing camera, with the bracket made from stainless steel to prevent rusting seen on cameras supplied elsewhere. The camera is produced by a factory we trust immensely for quality. We have had the very respected 1/3" Sony CCD 700TVL image sensor installed, to produce a very detailed view of the road/surroundings both day and night.
We give you the option of 60 degrees or 120 degrees when ordering. 60 degrees is only really suitable as a long distance rear view camera for monitoring traffic when driving. For all other applications please select the 120 degrees option.
7" Heavy Duty Dash Monitor Display:
- 7" display - the most popular screen size to allow for easy viewing of the images.
- A good quality 800x480 digital high resolution display with excellent colour replication.
- 3 Channels should you wish to add additional reversing or side cameras in the future.
- Auto dims to reduce glare when driving through tunnels/night time.
- Thick sunshade to prevent glare from sunlight during the day.
- Fitted with a rear channel to allow alternative brackets to fit.
White Bracket Reversing Camera:
- Comes with a white bracket camera that is fitted with our top rated (for standard definition) image sensor - Sony CCD 700TVL.
- The white reversing camera is popular with motorhomes and vans.
- Can either be mounted on a vertical face (rear wall of motorhome), or on a horizontal face (top of roof/door).
- Offers a choice of lens angles: 120 degrees for general use and parking, or 60 degrees for rear view/driving.
- Night Vision IR LED's for vision at night. These will emit light that is invisible to the human eye, but visible to the camera, allowing you to see obstacles in the dark for added safety.
- Fitted with a stainless steel bracket for rust protection.
Guarantee and Support:
- Offers lifetime support from UK specialists.
- Comes with a 2-year guarantee.
Cable Length Options
This drop down menu allows you to select the length of cable that goes between the camera and the monitor wiring harness. The monitor wiring harness has an approximately 1.5M long cable between the monitor connector, and the reversing camera input connectors. The camera also has an additional 45CM fly lead/tail coming off to it's connector.
We use a quality pure copper 4 pin screw locking connector cable on our extension cables to ensure a long lasting, stable picture.
Cable Length
We recommend cars/small car based vans require either our 5M or 7.5M length cable, medium length vans require 10M, long length vans and average length motorhomes upto 8.5M long require 12.5M, very long motorhomes require a 15M, and lastly coaches/HGVs require our 20M cable option.
8mm Disconnect Link
We are able to offer a small disconnect 8mm point on our 10M/12.5M/15M cable lengths. This is located 100cm from the front side of the cable (next to the monitor). This means you can run the cable through tight gaps/cupboards/bulk heads with just a small 8mm hole/gap required, reconnecting the larger connector once you have your cable next to the monitors wiring harness.
2010+ Dometic/Waeco Cable Adaptors
We often see motorhomes pre-fitted with the 2010+ Dometic/Waeco cable. Most commonly this is seen on Baileys, Burstner, and Hymer motorhomes, although has been found on a wide assortment of others too. See the photo below for an image of what this type of cable looks like.
If you choose the option for the adaptors then you will receive an adaptor to place on both sides of your existing cable (we won't give you a long cable). Essentially this turns your existing pre-fitted cable in to one of our 4 pin cables. See photo below of the pair of adaptors you will receive.
Additional Bracket Options
In all cases you will receive the standard U bracket that comes with this monitor. To add one of the additional monitor brackets to your kit bundle please see the descriptions/photos below. We also have a YouTube video showing the various bracket options below.
ACC035 - "Butterfly" Bracket option
So called because the base looks like a pair of butterfly wings. Fitted with an adhesive pad on the base, peel the protective layer off and stick to your clean dashboard. Additional screws can be used if you feel it needs reinforcement. The square nut fits in to the channel of your monitor, whilst there is a screw to the rear of the bracket that will then screw in to the square washer until it locks the two together.
ACC041 Quick Release Bracket option
The quick release bracket is one of the most popular bracket options. The bracket has a removable mounting plate that attaches to the rear channel of the monitor. This plate can then slide in to the bracket that is mounted to the dashboard and locks. To release, simply pull back the thumb switch at the rear, then slide the monitor up and out. Our monitors have disconnect points around a foot away from the monitor to allow it to disconnect. A bracket that makes initial install a little quicker, as well as allowing more adjustability in positioning of the display. Adhesive pad base for sticking to clean dashboard with bendable feet.
ACC705B - Heavy Duty Rear Mount Bracket Option
The most sturdy of all of our rear mounted dash mounts, all metal design. Monitor slides on to the bracket, which has a rear adjustment rotational wheel to lock the monitor to the bracket. Self adhesive base, with bendable "feet" for curvy dashboards. You can add screws if required.
ACC038 - Suction Mount Bracket Option
Only designed for temporary mounting eg. moving a monitor from one vehicle to another. This bracket has strong suction, people are often shocked by how strong it is. We use these when we road test new monitors for temporary mounting. A ball joint allows for good adjustment to give the monitor the optimum viewing angle.
ACC20540 - "Banana" Ceiling Mount Swan Neck Bracket Option
The ceiling mount bracket is a very sturdy and adjustable bracket mount for the monitor in this kit. Two screws secure this to the ceiling or plastic trim of the vehicle. The other side attaches to the channel on the back of the monitor and secures with a twist of the locking wheel. Release the tension by turning the hand screw knob on the left to allow the ball joint to rotate clockwise and anticlockwise, or up/down/left/right. These have been a very popular option since they were introduced.
Installation and Power Options:
- Easy installation with various power options that plug in to a socket on the monitors wiring harness/loom.
- Single power connection powers the entire system.
- Standard hardwiring ALWAYS included even when adding the additional connector options.
- Choose a lighter plug for the easiest plug and play solution. Some customers order this just for testing purposes before using one of our hardwiring options (fuse tap or bare wire) afterwards.
- Choose one of our fuse taps for an easy hard wire installation. We have had them designed so that one end plugs in to the monitor power socket on the end of the wiring harness, whilst on the other side of the 200cm lead has a mini blade or a standard blade fuse tap aka piggyback fuse holder, as well as a chassis earth/ground terminal fixing (find a screw/bolt connected to bare chassis and fix to this). See our downloadable PDF instructions on how to install a fuse tap/piggyback fuse holder to your vehicles fusebox.
For more information including main reversing camera kit instructions, and monitor instructions, please click the tab for PDF instructions. If you would like any information/questions that may not be present, please contact us.
 Click preview image to download the PDF file | For all of our cabled reversing camera kits Our main 4 pin reversing camera kit instructions. We prefer 4 pin screw locking connector cables in our kits for numerous reasons (no canbus issues, stable voltage, ability for always on, reliability, and heavy duty connectors). This downloadable PDF file will give you all the advice you will need. Some of our cameras will come with extra specific guidance or manuals to help that specific install. |
Monitor
7” Colour LCD screen
Power supply: 12V/24V
Power Consumption: 7.5W
Digital Screen Resolution: 800 x3(RGB)x480
3 Inputs
PAL/NTSC/AUTO
Full function Remote Control
Camera
Image Sensor :1/3 SONY CCD 960H 700TVL
TV System: PAL
Effective Pixels: 976*582
Minimum Illuminstion: 0.01 LUX
S/N Ratio: ≥48dB（AGC OFF）
Horizontal Resolution: 700 TV lines
Video Output:1.0vp-p,75Ohm
Backlight compensation: Auto
Vibration Rate: 4G
Working Temperature: -20℃ to 80℃ RH95% Max
Storage Temperature: -30℃ to 85℃ RH95% Max
Waterproof to Ip68
18 Infra red LEDs to provide night view (approx 5-10M effective range)
Stainless Steel Bracket (painted)
Mainland UK Shipping
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM).
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM).
Highlands and Islands UK Shipping
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Outside of the UK Shipping
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.