Numberplate Reversing Camera Kit with 7" Monitor | PM65-SD
High-Quality Number Plate Reversing Camera Kit with a 7" High-Resolution Display, 700tvl Hi-Res Image Sensor, 2-Year Guarantee, 12V/24V, fully adjustable camera tilt, Extra Wide Angle Aspheric Lens, Choice of cable lengths and mounting bracket options. Fast Delivery, Great Service and Support from the UK's leading Reversing Camera Specialists.
About our Numberplate Reversing Camera Kit with 7" Monitor
High-Quality Number Plate Reversing Camera Kit with a 7" High-Resolution Display, 700tvl Hi-Res Image Sensor, 2-Year Guarantee, 12V/24V, fully adjustable camera tilt, Extra Wide Angle Aspheric Lens, Choice of cable lengths and mounting bracket options. Fast Delivery, Great Service and Support from the UK's leading Reversing Camera Specialists.
Increases Reversing Safety - The most important reason, with almost a quarter of all accidents in the UK occurring during reversing. A clear, high-quality camera will help reduce the risk of harm to both people and property.
Great Camera Image Quality - The factory who produce this camera have over 20 years of experience as a manufacturer. They even produce their own modules to get the best out of the image sensor. Expect a nice colourful image, and a very capable picture at night time when it gets very dark.
Excellent Monitor Image Quality - With a huge amount of experience sampling hundreds of monitors over the decades, we are well placed to be a good judge of monitor image quality. We know that numbers only tell half the story. There are different grades of monitor panel on the market and we carefully test all of our monitors in the real world before adding them to our range. 2x monitors can look identical on paper, yet add a camera and take them outside and you can have a vastly different user experience. The cheaper version can struggle to show differences in shading that cause you to lose a lot of detail that your reverse camera has sent to it. This monitor performs brilliantly at replicating both bold, vibrant colours, as well as subtle differences in shade, which all helps to make viewing easy on the eye as well as helping you to see obstacles that you might otherwise miss.
Extra Wide 150° Aspheric Lens Fitted - Going wide angle often means the image that is produced looks like you are inside a fishbowl looking out - not with this camera! A good quality aspheric lens is used to achieve an image that is much clearer and easier to use.
Amazing Build Quality and Reliability - Both camera and monitor are on our leader board for reliability with an extremely low fault rate. The build quality is self-evident when you handle both the camera and display.
2 Year Guarantee - Due to our careful selection of long term trusted manufacturers, we provide a 2-year guarantee on this monitor. In the unlikely event of a fault during this period, we will quickly rectify with either a repair or replacement. Outside of this period we are often able to offer a low cost monitor repair service, as well as spare parts e.g. wiring harness, camera etc. Great if you plan to take the monitor with you if you change vehicle, or for confidence that you can keep the system working well for many, many years to come in the future.
IP69K Waterproof Camera - An IP rating is the "Ingress Protection" rating of an item. IP69K is the highest protection level against water and dust. Guaranteed to keep itself protected against the worst weather the British Isles can throw at it.
IR Night Vision - It's rare to see a number plate camera with night vision, but this is one of them. Thanks to the sensitive image sensor and the powerful IR LED's fitted you can stay safe from collisions even in dark conditions. The IR LED's and Glass Lens being separated from each other means you can expect nice deep contrasts at night. No worry of blinding following vehicles, unlike some cheaper cameras with plain white light LED's, as Infra Red light is below the visible spectrum of the human eye.
Adjustable Cylinder Camera - Releasing the two screws at the front of the camera will allow the cylindrical camera to rotate up/down to get the optimum angle. Whether you decide you would like the camera against a vertical surface, or whether you would like the camera on a horizontal surface e.g. on a lip above the number plate you can swap between the two by removing the two screws to the rear of the camera, flipping the camera upside down, and re-inserting in to the camera and re-inserting the two screws to secure.
Built In Camera Microphone / Monitor Speaker - This camera is fitted with a built in microphone. This means that you can listen to the external surroundings of the camera via the monitors built in speaker. The volume can be turned down to zero if you do not wish to hear anything from outside.
Full Function Remote Control - We supply a remote control that will allow you to change channels, operate the menu, turn the monitor on/off etc. This is especially useful if you have the monitor mounted far away from you.
Reverse Trigger Wire for Handsfree Use - The monitor wiring harness has a green trigger wire present. If you add a positive power feed from the reverse light to this wire it will automatically turn the monitor on (if it was off at the time) and select V2 (Channel 2 - Reversing Camera Channel), when you leave reverse gear it would revert to its last state - in this case power off.
Works on 12V and 24V Vehicles - The monitor can be powered up by either a 12V feed e.g. Vans, Cars, Motorhomes, or a 24V feed e.g. HGV/LGV/Lorry. Any voltage up to 32V will be regulated down to 12V by the Monitor and supplied to the camera.
Choice of Monitor Bracket Options - This monitor is fitted with a central rear channel to mount various monitor brackets. It comes with a "butterfly" bracket as standard, but a discounted additional bracket can be ordered using the drop down menu on this listing, see the monitor bracket tab for more details.
For more information including main reversing camera kit instructions, and monitor instructions, please click the tab for PDF instructions. If you would like any information/questions that may not be present, please contact us.
Additional Monitor Bracket Options
To add a discounted price additional monitor bracket to your product bundle, please see the descriptions/photos below. We also have a YouTube video showing the various bracket options below.
ACC035 - "Butterfly" Bracket option
So called because the base looks like a pair of butterfly wings. Fitted with an adhesive pad on the base, peel the protective layer off and stick to your clean dashboard. Additional screws can be used if you feel it needs reinforcement. The square nut fits in to the channel of your monitor, whilst there is a screw to the rear of the bracket that will then screw in to the square washer until it locks the two together.
ACC041 Quick Release Bracket option
The quick release bracket is one of the most popular bracket options. The bracket has a removable mounting plate that attaches to the rear channel of the monitor. This plate can then slide in to the bracket that is mounted to the dashboard and locks. To release, simply pull back the thumb switch at the rear, then slide the monitor up and out. Our monitors have disconnect points around a foot away from the monitor to allow it to disconnect. A bracket that makes initial install a little quicker, as well as allowing more adjustability in positioning of the display. Adhesive pad base for sticking to clean dashboard with bendable feet.
ACC705B - Heavy Duty Rear Mount Bracket Option
The most sturdy of all of our rear mounted dash mounts, all metal design. Monitor slides on to the bracket, which has a rear adjustment rotational wheel to lock the monitor to the bracket. Self adhesive base, with bendable "feet" for curvy dashboards. You can add screws if required.
ACC038 - Suction Mount Bracket Option
Only designed for temporary mounting eg. moving a monitor from one vehicle to another. This bracket has strong suction, people are often shocked by how strong it is. We use these when we road test new monitors for temporary mounting. A ball joint allows for good adjustment to give the monitor the optimum viewing angle.
ACC20540 - "Banana" Ceiling Mount Swan Neck Bracket Option
The ceiling mount bracket is a very sturdy and adjustable bracket mount for the monitor in this kit. Two screws secure this to the ceiling or plastic trim of the vehicle. The other side attaches to the channel on the back of the monitor and secures with a twist of the locking wheel. Release the tension by turning the hand screw knob on the left to allow the ball joint to rotate clockwise and anticlockwise, or up/down/left/right. These have been a very popular option since they were introduced.
Cable Length Options
This drop down menu allows you to select the length of cable that goes between the camera and the monitor wiring harness. When choosing cable length, please be aware that there is between 2-3M length supplied with the monitor wiring, whilst the reversing camera has another approx. 0.5M. We use quality pure copper 4 pin screw locking connector cables to ensure a long lasting, stable picture.
What Length Should I select?
5M (16ft) - Ideal if you have a very small vehicle e.g. a car or compact van.
7.5M (24ft) - Recommended for large cars, 4x4, and some smaller vans.
10M (32ft) - Most popular length for standard sized vans.
12.5M (41ft) - Most popular length for Motorhomes and larger vans.
15M (49ft) - Ideal for large Motorhomes and HGV/LGV.
20M (65ft) - Fits very large vehicles e.g. HGV, Coaches, and LGV.
8mm Disconnect Link
We are able to offer a small disconnect 8mm point on our 10M/12.5M/15M cable lengths. This is located 100cm from the front side of the cable (next to the monitor). This means you can run the cable through tight gaps/cupboards/bulk heads with just a small 8mm hole/gap required, reconnecting the larger connector once you have your cable next to the monitors wiring harness.
2010+ Dometic/Waeco Cable Adaptors
We often see motorhomes pre-fitted with the 2010+ Dometic/Waeco cable. Most commonly this is seen on Baileys, Burstner, and Hymer motorhomes, although has been found on a wide assortment of others too. See the photo below for an image of what this type of cable looks like.
If you choose the option for the adaptors then you will receive an adaptor to place on both sides of your existing cable (we won't give you a long cable). Essentially this turns your existing pre-fitted cable in to one of our 4 pin cables. See photo below of the pair of adaptors you will receive.
Power Connection Options
You have the option to add additional leads that plug in to a DC socket on the monitor wiring harness. You will always be supplied with the standard power wire, which gives you a red wire and a black wire to solder / crimp to a power supply.
On the drop down menus you will notice there are two options selectable. One to add a lighter plug, one for a fuse tap. Scroll down for details on each option.
Lighter Plug
Selecting this option adds an additional lighter plug lead - attaches to a socket on the end of the 300cm monitor wiring loom/harness. Some people order this option just to try out there new kit before hardwiring permanently.
Fuse Tap (Mini blade, Standard blade)
Selecting this option adds an additional easy-wire fuse tap lead with built in earth terminal connector.
We designed and had this product produced in 2023, and they have been very popular. We wanted to create something that meant our customers could hardwire a reversing camera system to their vehicle with ease and minimal tools. Fuse taps have already become popular for installing dash cams, so we wanted to make them more popular for reversing camera kits too.
Usually fuse taps have no earth terminal connector and require crimp tools to connect to your wiring - our easy wire fuse tap kits are different. They come supplied with 2M of twin wire (power + earth) attached. The wires can be pulled apart should you wish to earth to an area far from the fuse box.
Choose a fuse that's active when the ignition is on. Remove the original fuse and place it in the empty slot of the fuse tap. The correct rated fuse for the new camera system is supplied already installed in the correct slot. Install the fuse tap (with the two fuses fitted) in to the fuse box (where you removed the original fuse). Lastly, connect the earth terminal to a chassis bolt or screw (or add a new bolt/screw to secure it).
The mini blade is the most commonly seen fuse size on modern vehicles.
Standard blade used to be the most common fuse size installed, and is still commonly seen, even on very recent vehicles.
PDF Instructions
We aim to provide as much information as possible to assist with both the installation and use of our equipment (something we here is very rare nowadays). If you require any further assistance with any aspect of the fitment then please contact us. Also, if you feel anything could be added to our instructions or a sticker produced for the box to assist in guidance, please let us know. We get better with your assistance.
 Click preview image to download the PDF file | General Kit Installation instructions Our main 4 pin reversing camera kit instructions. We prefer 4 pin screw locking connector cables in our kits for numerous reasons (no canbus issues, stable voltage, ability for always on, reliability, and heavy duty connectors). This downloadable PDF file will give you all the advice you will need |
 Click preview image to download the PDF file | MON16/MON745 7 Inch High Resolution Monitors If you choose the PM60 series kits you will have the MON16/MON745 monitor supplied, which is covered by these instructions. They will guide you through the various menu functions including rotation, adjustable guidelines, trigger delays, interval mode, and display settings. |
 Click preview image to download the PDF file | Instructions for fitting our CAM103 number plate reversing camera Instructions on fitting and adjusting the number plate reversing camera. |
If you are ordering the Mini Bade or Standard Blade Fuse Tap power option, then please see the further instruction sheet below dealing with this time saving connection method.
 | Instructions for fitting Fuse Taps / Piggyback fuse holders for power supply Our guide on how to correctly install a piggyback fuse holder tap to power a reversing camera system from the fuse box. |
Technical Specification
Vehicle Monitor Display
7” Colour LCD screen
Audio Output: 0.5W
Loudspeaker: one 15x40mm round loudspeaker
Power supply: 12V/24V
Power Consumption: 4W Max
Digital Screen Resolution: 800 x3(RGB)x480
Contrast: 500:1
Brightness: 400cd/m2
Viewing Angle: U: 50 degrees/ D: 60 degrees, R/L: 70 degrees
Operating Temperature: -10C to +65C
Storage Temperature: -30C to +80C RH90%
2 Inputs
PAL/NTSC/AUTO
Mirror/Normal Switch on both channels
Full function Remote Control
Numberplate Reversing Camera
TV System: PAL
Effective Pixels: 960 (H) x 576 (V)
Resolution: 600TV Lines
Sensing Area: 4.880mm x 3.670mm
Scanning System: 2:1Interlace
Sync. System: Internal
Minimum Illumination: 0 lux(LED ON)
Horizontal Sync. Frequency: 15.625KHz
Vertical Sync. Frequency: 50Hz
Video Output: 1.0vp-p, 75Ohm
Gamma Consumption: 0.45
AGC: Auto
S/N Ratio: Better than 43.3dB
White Balance: Auto
Electronic Shutter: 1/50(PAL) ~ 1/10,000 Seconds
BLC: Auto
Power Supply: DC12V
Operating Temperature: -20°C~70°C , RH95% MAX
Storage Temperature: -40°C~80°C, RH95% MAX
Lens Angle: 150° Approx Diagonal
Mainland UK Shipping
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM).
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM).
Highlands and Islands UK Shipping
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Outside of the UK Shipping
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.