White Twin Motorhome Sony CCD Dual Lens Reversing + Rear View Camera Kit with Mirror Monitor | PM33W-SD
Our popular rear view mirror mount monitor combined with our popular twin reversing and rear view driving camera. Two cameras in one painted stainless steel bracket. Camera comes fitted with the long established high resolution 1/3" Sony CCD image sensors.
Twin Lens White Motorhome Reversing + Rear View Camera Kit Details with Mirror Monitor
This mirror mounted reversing camera kit includes a white-painted stainless steel TWIN bracket reverse and rear view camera. The high-resolution digital LCD panel on the monitor and the Sony 1/3" CCD 700tvl image sensor on the camera means you can expect a good picture quality day and night. The kit offers :
Two Cameras in One Bracket - This product bundle will give you both a rear view camera and a reverse parking camera in one bracket. The most popular option for motorhomes. Makes the kit useful 100% of your driving time vs the 0.1-2% of the time you are reversing.
Choice of Mirror Mounting Options - We stock two types of mirror monitor, made by the same factory to the same spec but with different rear mounting panels. The clip over type has strong spring loaded lower clips that pull down to clamp against an existing interior mirror to provide a secure fit. To attach directly to the windscreen please see our info tab named "mirror mount options" for more details of the windscreen stalk (swan neck) brackets available.
High Resolution Display - Fitted with one of the best quality 7" hi-res digital LCD panels we have seen, this mirror monitor will give you rich colours, a bright picture that is easy to see, and easy to view even when sat at an angle to the display.
High Resolution Reverse Camera - This bracket camera is fitted with a Sony 811 700tvl 1/3" CCD image sensor. Very widely respected in the CCTV industry. The image sensor is the part of the camera that captures the picture detail, so it has a huge impact on picture quality. We consider this to be the best image sensor available for standard definition reversing cameras.
Anti-Rust Stainless Steel Bracket and Hood - Both parts of the bracket are made from painted stainless steel. Stainless steel doesn't suffer from the rusty, broken brackets that mild steel suffers from. Most reversing cameras you find on the market today are still using mild steel. You can check using a magnet - mild steel will stick to the magnet, whilst stainless steel won't. The paint finish on both bracket and main body is also matt finish as we find this is more corrosion resistant than gloss finish paints. This reversing camera will stay looking good for a long time.
Small Cable Entry Hole - Thanks to the slimline disconnect point we have added to the two camera cables. This means only an 8mm hole is required to get each cable inside the vehicle. Please kindly note that these 8mm disconnects are not waterproof. If you are planning your cable entry more than 1ft away from the camera please let us know that you want the "no-8mm disconnect" version, which will go straight to the very waterproof 4 pin connector.
Add Adjustable Guidelines to Image - The menu system on this monitor is one of the most advanced that we have come across. One of the features is that you can add guidelines to the picture, as well as move them about. You can even choose to measure the distance to the lines and change the numbers, as well as specifying if you wish the units to be displayed as M or ft. To use this feature you must use the green reverse trigger wire, if you activate them in the menu the lines will only display when the green trigger has power e.g. when in reverse. For more details please see page 6 of our rear view mirror monitor instruction manual.
Easy-Fit Wiring - The wiring uses our 4 pin screw locking connectors, which carry both power/signal down the same cable. This means the monitor sends power to the camera, so no reverse light connection is required (unless you wish to use the trigger wire for auto switching between cameras). Just a single extension cable to run the length of the vehicle, the 2x connections on both sides become a single cable approximately 30cm/1ft from the end of the cable.
Convenient Location - This monitor is one of the most popular for cars, vans, and motorhomes because it is a natural place to look when you want to view behind you, as well as keeping the dashboard clear for other devices you may use.
Two Year Guarantee and Lifetime Support - This monitor and reversing camera kit should last a very long time without any issue. We guarantee it to be free from faults for two years. After two years we are able to offer low cost repairs on the monitor to keep your system in good condition and avoid extra time or expense installing all new components. We also keep good stock of spare parts such as wiring harnesses, cables, and cameras should you decide to take the monitor out of the vehicle with you when you sell your vehicle but leave the wiring where it is.
Choice of power options - We have had a DC socket added to the monitors wiring harness that allows you to select various power lead attachments to plug in to this. As standard you are supplied with a lead that terminates in a red wire (+12V / +24V) and black wire (Earth / Ground). You may also choose from a cigarette lighter 12V plug option, or an easy wire fuse tap option that allows you to hardwire the whole kit without soldering or crimping. Simply remove a fuse from the fuse box, insert it in to the fuse tap, then connect the earth terminal to a chassis screw/bolt. See the power options tab for more details.
Optional slimline 8mm disconnect point on extension cable - The cable length selection drop down menu includes an 8mm disconnect point option on selected cable lengths. If you select this option we will supply a version of the main extension cable that has a small 8mm diameter disconnect point, so that the larger connector is temporarily removed to allow for easy feeding through the vehicle and any tight gaps/cupboards etc you may encounter. The disconnect is 1M from the front of the cable, so it will re-join close to the monitor and convert back to the 4 pin screw connector for the monitor input.
Optional Pre-fitted Cable Adaptors for 2010+ Motorhomes - In the cable length section you will find there is an option to add 2010+ Dometic / Waeco compatible adaptor cables to the kit, instead of a new cable. This type of grey cable is the most commonly found pre-fitted to motorhomes by the factory. Especially common in 2010+ Baileys and Burstner motorhomes. Our adaptors will screw and lock to this original cable. Check out our YouTube video showing the install of our twin lens reversing camera system to the 6 pin pre-fitted Dometic cable (opens in new tab).
Reversing Safety - The amount of time I have had the phone call "I keep hitting things when I reverse, I had better get a reversing camera". Increasing your visibility of the rear of your vehicle can help reduce the chances of hitting a person, or colliding with another vehicle/object. Not only will this help avoid extra unexpected stress and costs, this will also reduce the stress whilst manoeuvring.
For more information including main reversing camera kit instructions, and monitor instructions, please click the tab for PDF instructions. If you would like any information/questions that may not be present, please contact us.
Rear View Mirror Mount Options Details
We have various mounting options for the rear-view mirror reversing camera kits. Please see the options below. Remember to carefully check the description and photos, as some mounts look similar. We only stock the most common vehicle mounts (usually vans). Be aware that if there is a plastic cover over the mounting plate this may not fit back on with a bracket in place.
Clip-over Existing Mirror - This is the most popular option, especially if you already have an interior mirror to clip on to. This option has a version of the mirror monitor that has strong spring loaded clamps to attach it to the old mirror.
ACCMB1 - Mercedes Sprinter with Auto Lights / Wipers Option - We usually see this type of mounting on Mercedes Sprinter vans that are fitted with auto lights or wipers. 90 degree twist (clockwise from 9 o'clock position to fit).
ACCMB2 - Some Ford / Universal - Most commonly seen on Ford vehicles e.g. Ford Transit. Also known as the universal bracket because the mounting plate (button) that works with this bracket is the easiest to glue on. We stock the button and glue kit (see further down). Slides down from above.
ACCMB3 - Some Volkswagen - We usually see this mounted to Transporter, various cars, and Crafter vans built after 2017. 90 degree twist (clockwise from 9 o'clock position to fit).
ACCMB5 - Some Mercedes / Renault / Vauxhall - Most commonly found on Mercedes Sprinters without auto lights/wipers, as well as older Renault Trafic, Renault Master and Vauxhall Vivaro vans. Mounts by sliding down from above.
ACCMB6 - Universal Ceiling Mount - Allows you to attach the monitor to the ceiling.
ACCMB7 - Some Citroen Relay / Peugeot Boxer / Fiat Ducato / Iveco Daily Vans - We typically see this fitted to earlier models of Relay/Boxer/Ducato vans, as well as recent Iveco Daily vans. Slide down from above fitment.
ACCMB8 - Some Renault Master, Vauxhall Movano and Nissan NV400 Vans - We typically see this fitted to earlier models of Renault Master, Vauxhall Movano, and Nissan NV400 vans. Slide up from below fitment.
ACCMB2 + MP35 - Some Citroen Relay / Peugeot Boxer / Fiat Ducato / Ford Transit / New Vauxhall Vivaro - Most commonly found on more recent Ducato/Relay/Boxer vans. Usually this will be hidden by a round plastic circular cover. There will also be a spring underneath the cover that will need to be twisted anti-clockwise to remove (be careful in case it pings off in the direction of your eyes).
ACCMB2 + Button + Glue - Universal - adds a button with Loctite 319 interior mirror adhesive for ACCMB2 bracket to attach to - This is ideal if you find your vehicle doesn't have any mounting plate fitted, or has one that we have no bracket to fit to. This bundle will provide you with a universal bracket, a universal button/mounting plate, and the Loctite 319 interior mirror adhesive required to fix this to the windscreen. We provide full detailed instructions on how to achieve a good, strong bond.
Power Connection Options
You have the option to add additional leads that plug in to a DC socket on the monitor wiring harness. You will always be supplied with the standard power wire, which gives you a red wire and a black wire to solder / crimp to a power supply.
On the drop down menus you will notice there are two options selectable. One to add a lighter plug, one for a fuse tap. Scroll down for details on each option.
Lighter Plug
Selecting this option adds an additional lighter plug lead - attaches to a socket on the end of the 300cm monitor wiring loom/harness. Some people order this option just to try out there new kit before hardwiring permanently.
Fuse Tap (Mini blade, Standard blade)
Selecting this option adds an additional easy-wire fuse tap lead with built in earth terminal connector.
We designed and had this product produced in 2023, and they have been very popular. We wanted to create something that meant our customers could hardwire a reversing camera system to their vehicle with ease and minimal tools. Fuse taps have already become popular for installing dash cams, so we wanted to make them more popular for reversing camera kits too.
Usually fuse taps have no earth terminal connector and require crimp tools to connect to your wiring - our easy wire fuse tap kits are different. They come supplied with 2M of twin wire (power + earth) attached. The wires can be pulled apart should you wish to earth to an area far from the fuse box.
Choose a fuse that's active when the ignition is on. Remove the original fuse and place it in the empty slot of the fuse tap. The correct rated fuse for the new camera system is supplied already installed in the correct slot. Install the fuse tap (with the two fuses fitted) in to the fuse box (where you removed the original fuse). Lastly, connect the earth terminal to a chassis bolt or screw (or add a new bolt/screw to secure it).
The mini blade is the most commonly seen fuse size on modern vehicles.
Standard blade used to be the most common fuse size installed, and is still commonly seen, even on very recent vehicles.
PDF Instructions
We aim to provide as much information as possible to assist with both the installation and use of our equipment (something we here is very rare nowadays). If you require any further assistance with any aspect of the fitment then please contact us. Also, if you feel anything could be added to our instructions or a sticker produced for the box to assist in guidance, please let us know. We get better with your assistance.
![]() Click preview image to download the PDF file | For all of our cabled reversing camera kits Our main 4 pin reversing camera kit instructions. We prefer 4 pin screw locking connector cables in our kits for numerous reasons (no canbus issues, stable voltage, ability for always on, reliability, and heavy duty connectors). This downloadable PDF file will give you all the advice you will need. Some of our cameras will come with extra specific guidance or manuals to help that specific install. |
![]() Click preview image to download the PDF file | Clip-Over Option Mirror Monitor Instructions If you choose a mirror monitor kit and you don't select the AHD upgrade option then this monitor will be supplied. It is a great monitor with lots of menu options, lovely colour, adjustable guidelines, and good viewing angle range. |
![]() Click preview image to download the PDF file | Bracket to Windscreen Mirror Monitor Instructions If you choose a mirror monitor kit with a direct to windscreen swan neck mount option, then this will be the monitor that is supplied. This guide will teach you about adjusting guidelines, wiring, and other menu settings. |
If you are ordering the Mini Bade or Standard Blade Fuse Tap power option, then please see the further instruction sheet below dealing with this time saving connection method.
![]() | Instructions for fitting Fuse Taps / Piggyback fuse holders for power supply Our guide on how to correctly install a piggyback fuse holder tap to power a reversing camera system from the fuse box. |
Monitor
7” Diagonally Measured Colour LCD screen
Power supply: 12V/24V
Power Consumption: 7.5W Max
Digital Screen Resolution: 800 x3(RGB)x480
2 Inputs
PAL/NTSC/AUTO
Camera
Image Device:1/3 SONY 811 CCD 960H 700TVL
TV System: PAL
Effective Pixels: 976*582
Apect Ratio of output: 4:3
Scanning System: 2:1 Interlace
Sync. System: Internal
Resolution: 700 TV lines
Minimum Illumination:0 Lux (IR LEDs on)
Waterproof to Ip68
Infrared LEDs to provide night view
Two Cameras one with wide 120-degree lens and one with narrow 45-degree lens
Mirror image only
Stainless Steel Bracket (painted)
Mainland UK Shipping
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM).
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM).
Highlands and Islands UK Shipping
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Outside of the UK Shipping
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.