7" Split-Screen Monitor for Reversing, Blindspot, and Rear View Cameras | MON7005
7-inch 4-channel quad screen monitor display for reversing, rear view, and side view blind spot cameras. Multiple split arrangements. Heavy duty design and robust build quality. Two year guarantee, lifetime support.
About our 12V/24V 7" Split-Screen Monitor for Reversing / Rear View / Blind Spot Cameras
7-inch 4-channel quad screen monitor display for reversing, rear view, and side view blind spot cameras. Multiple split arrangements. Heavy duty design and robust build quality. Two year guarantee, lifetime support. Come with the following advantages :
High Resolution 7" Digital Panel - This monitor is fitted with a top quality high resolution digital LCD panel with LED backlight. We find there is huge variation between the performance of LCD displays used on vehicle monitors. The one fitted to this monitor has very good performance, providing a bright, clear display for viewing blindspots on your vehicle.
Works on 12V and 24V Vehicles - This monitor is fitted with a voltage regulator, meaning that it can operate on both 12V vehicles such as vans and motorhomes, as well as 24V vehicles such as HGV, LGV and Lorries.
Multiple Split Screen Modes - Various 1, 2, 3 and 4 way split modes to select from using the mode button on the front of the screen (or remote control). See image for all the different split options this monitor can perform.
Removeable Sunshade - A deep, thick sunshade us provided should you wish to minimise sun glare on the display. This is removeable, which is desirable when mounting high up or in areas where space is at a premium.
4 Channels for Multiple Reverse / Side View / Rear View Cameras - The monitor wiring harness is equipped with 4x 4 pin aviation screw connector inputs.
Trigger Wires e.g. Indicators/Reverse Gear Automation - Each of the 4 channels has its own trigger wire, which you can use to trigger the channel to display. Most commonly these are linked to the reverse light or side indicator lights. When the wires receive a power feed, the monitor will automatically display the associated channel. If more than one trigger has a feed, it will perform a split image between the triggered channels.
Two Year Guarantee - Our respected two year guarantee applies to this well built display. This means that should you experience any faults within your first two years of ownership, we will either repair or replace the monitor.
Lifetime Support and Potential Low Cost Repairs - Even beyond the two year guarantee, we strive to look after you when it comes to spare parts and potential low cost repairs.
Choice of Mounting Bracket Options - The monitor is supplied with a heavy duty U bracket. This bracket can be inverted to allow the monitor to be hung upside down on the ceiling. In addition to this, the monitor can be used with our selection of monitor brackets. See the drop down menu to add a discounted bracket to your monitor bundle.
4 Pin Connector Inputs (Optional RCA Adaptors) - This monitor uses the most preferred type of connector - the 4 Pin screw aviation. We are also able to supply adaptors to convert 1 or more of these inputs in to the yellow RCA Phono type, useful if you are replacing monitors using this type of cabling.
Additional Monitor Bracket Options
To add a discounted price additional monitor bracket to your product bundle, please see the descriptions/photos below. We also have a YouTube video showing the various bracket options below.
ACC035 - "Butterfly" Bracket option
So called because the base looks like a pair of butterfly wings. Fitted with an adhesive pad on the base, peel the protective layer off and stick to your clean dashboard. Additional screws can be used if you feel it needs reinforcement. The square nut fits in to the channel of your monitor, whilst there is a screw to the rear of the bracket that will then screw in to the square washer until it locks the two together.
ACC041 Quick Release Bracket option
The quick release bracket is one of the most popular bracket options. The bracket has a removable mounting plate that attaches to the rear channel of the monitor. This plate can then slide in to the bracket that is mounted to the dashboard and locks. To release, simply pull back the thumb switch at the rear, then slide the monitor up and out. Our monitors have disconnect points around a foot away from the monitor to allow it to disconnect. A bracket that makes initial install a little quicker, as well as allowing more adjustability in positioning of the display. Adhesive pad base for sticking to clean dashboard with bendable feet.
ACC705B - Heavy Duty Rear Mount Bracket Option
The most sturdy of all of our rear mounted dash mounts, all metal design. Monitor slides on to the bracket, which has a rear adjustment rotational wheel to lock the monitor to the bracket. Self adhesive base, with bendable "feet" for curvy dashboards. You can add screws if required.
ACC038 - Suction Mount Bracket Option
Only designed for temporary mounting eg. moving a monitor from one vehicle to another. This bracket has strong suction, people are often shocked by how strong it is. We use these when we road test new monitors for temporary mounting. A ball joint allows for good adjustment to give the monitor the optimum viewing angle.
ACC20540 - "Banana" Ceiling Mount Swan Neck Bracket Option
The ceiling mount bracket is a very sturdy and adjustable bracket mount for the monitor in this kit. Two screws secure this to the ceiling or plastic trim of the vehicle. The other side attaches to the channel on the back of the monitor and secures with a twist of the locking wheel. Release the tension by turning the hand screw knob on the left to allow the ball joint to rotate clockwise and anticlockwise, or up/down/left/right. These have been a very popular option since they were introduced.
Technical Specification
Power supply: 12 - 24v DC
Max current: 800mA
TV system: PAL or NTSC
Aspect ratio: 16:9
Resolution: 800 x R.G.B x480
Working temperature: 0 - 60 degrees C
Storage temperature: -10 to 70 degrees C
Dimensions: 180 x 121 x 23mm (not includsing bracket)
Touch sensitive switches
4 trigger wires to link to indicators or reversing light with time delay
On screen menu
7" colour high resolution panel with LED backlight
Mainland UK Shipping
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM).
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM).
Highlands and Islands UK Shipping
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Outside of the UK Shipping
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.