7" AHD Reversing Camera Vehicle Monitor | MON16AHD
7" Monitor Display for AHD Reversing Cameras, 2-Channel, Top Quality IPS 1024x600 Panel, 2 Year Guarantee, Sunshade, Can add Guidelines when reversing, 720P or 1080P inputs, 4 Pin Inputs (optional RCA adaptors), Lifetime Support and Fast Delivery from the highly rated REVCAMUK team.
About our 7" AHD Reversing Camera Vehicle Monitor
7" Monitor Display for AHD Reversing Cameras, 2-Channel, Top Quality IPS 1024x600 Panel, 2 Year Guarantee, Sunshade, Can add Guidelines when reversing, 720P or 1080P inputs, 4 Pin Inputs (optional RCA adaptors), Lifetime Support and Fast Delivery from the highly rated REVCAMUK team.
Excellent Monitor Image Quality - With a huge amount of experience sampling hundreds of monitors over the decades, we are well placed to be a good judge of monitor image quality. We know that numbers only tell half the story. There are different grades of monitor panel on the market and we carefully test all of our monitors in the real world before adding them to our range. 2x monitors can look identical on paper, yet add a camera and take them outside and you can have a vastly different user experience. The cheaper version can struggle to show differences in shading that cause you to lose a lot of detail that your reverse camera has sent to it. This monitor performs brilliantly at replicating both bold, vibrant colours, as well as subtle differences in shade, which all helps to make viewing easy on the eye as well as helping you to see obstacles that you might otherwise miss.
2x AHD High Definition 1080P 4-Pin Channel Inputs - This monitor is fitted with a fly lead that connects to a 200cm wiring harness/loom. At the end of this wiring you will find 2x 4 pin channel inputs. The monitor is recommended for 720P/1080P AHD Reversing Cameras, although you can still add the traditional CVBS signal reversing cameras (should you have any existing cameras you wish to retain). It is important to note that we do not recommend using an AHD monitor with a CVBS camera if you are installing a fresh system. CVBS cameras work better with CVBS monitors. We always recommend using an AHD Reversing Camera with this monitor.
2 Year Guarantee - Due to our careful selection of long term trusted manufacturers, we provide a 2-year guarantee on this monitor. In the unlikely event of a fault during this period, we will quickly rectify with either a repair or replacement. Outside of this period we are often able to offer a low cost repair service, as well as spare parts e.g. wiring harness. Great if you plan to take the monitor with you if you change vehicle, or for confidence that you can keep the system working well for many, many years to come in the future.
Works on 12V and 24V Vehicles - The monitor can be powered up by either a 12V feed e.g. Vans, Cars, Motorhomes, or a 24V feed e.g. HGV/LGV/Lorry. Any voltage up to 32V will be regulated down to 12V by the Monitor and supplied to the camera.
Choice of Monitor Bracket Options - This monitor is fitted with a central rear channel to mount various monitor brackets. It comes with a "butterfly" bracket as standard, but a discounted additional bracket can be ordered using the drop down menu on this listing, see the monitor bracket tab for more details.
In-built Speaker - If your reversing camera has a microphone built in (quite rare), the audio from it can be heard from the monitor. You can choose the volume this is played back at, or turn the volume to zero if you don't want to hear anything at all. This is a useful feature for some people, who may need to hear commands from other people to the rear of the vehicle.
Full Function Remote Control - We supply a remote control that will allow you to change channels, operate the menu, turn the monitor on/off etc. This is especially useful if you have the monitor mounted far away from you.
Reverse Trigger Wire for Handsfree Use - The monitor wiring harness has a green trigger wire present. If you add a positive power feed from the reverse light to this wire it will automatically turn the monitor on (if it was off at the time) and select V2 (Channel 2 - Reversing Camera Channel), when you leave reverse gear it would revert to its last state - in this case power off. If the monitor was on already and you were watching channel 1, it would swap across to channel 2 before returning to its last state - in this case channel 1.
Additional Monitor Bracket Options
To add a discounted price additional monitor bracket to your product bundle, please see the descriptions/photos below. We also have a YouTube video showing the various bracket options below.
ACC035 - "Butterfly" Bracket option
So called because the base looks like a pair of butterfly wings. Fitted with an adhesive pad on the base, peel the protective layer off and stick to your clean dashboard. Additional screws can be used if you feel it needs reinforcement. The square nut fits in to the channel of your monitor, whilst there is a screw to the rear of the bracket that will then screw in to the square washer until it locks the two together.
ACC041 Quick Release Bracket option
The quick release bracket is one of the most popular bracket options. The bracket has a removable mounting plate that attaches to the rear channel of the monitor. This plate can then slide in to the bracket that is mounted to the dashboard and locks. To release, simply pull back the thumb switch at the rear, then slide the monitor up and out. Our monitors have disconnect points around a foot away from the monitor to allow it to disconnect. A bracket that makes initial install a little quicker, as well as allowing more adjustability in positioning of the display. Adhesive pad base for sticking to clean dashboard with bendable feet.
ACC705B - Heavy Duty Rear Mount Bracket Option
The most sturdy of all of our rear mounted dash mounts, all metal design. Monitor slides on to the bracket, which has a rear adjustment rotational wheel to lock the monitor to the bracket. Self adhesive base, with bendable "feet" for curvy dashboards. You can add screws if required.
ACC038 - Suction Mount Bracket Option
Only designed for temporary mounting eg. moving a monitor from one vehicle to another. This bracket has strong suction, people are often shocked by how strong it is. We use these when we road test new monitors for temporary mounting. A ball joint allows for good adjustment to give the monitor the optimum viewing angle.
ACC20540 - "Banana" Ceiling Mount Swan Neck Bracket Option
The ceiling mount bracket is a very sturdy and adjustable bracket mount for the monitor in this kit. Two screws secure this to the ceiling or plastic trim of the vehicle. The other side attaches to the channel on the back of the monitor and secures with a twist of the locking wheel. Release the tension by turning the hand screw knob on the left to allow the ball joint to rotate clockwise and anticlockwise, or up/down/left/right. These have been a very popular option since they were introduced.
Technical Specification
7” Diagonally Measured Colour IPS screen
Power supply: 12V/24V
Power Consumption: 7.5W Max
Audio Output: 0.5W
Loudspeaker: one 15x40mm round loudspeaker
Digital Screen Resolution: 1024 x3(RGB)x600
2 Hybrid Inputs
PAL/NTSC/AUTO
Full function Remote Control
PDF Instructions
We aim to provide as much information as possible to assist with both the installation and use of our equipment (something we here is very rare nowadays). If you require any further assistance with any aspect of the fitment then please contact us. Also, if you feel anything could be added to our instructions or a sticker produced for the box to assist in guidance, please let us know. We get better with your assistance.
 Click preview image to download the PDF file | MON16AHD 7 Inch High Definition AHD Monitor These instructions will guide you through the various menu functions including how to adjust the guidelines, picture etc. |
Mainland UK Shipping
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM).
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM).
Highlands and Islands UK Shipping
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Outside of the UK Shipping
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.