RV66 Compatible Replacement Reversing Camera with 6 Pin PS/2 adaptor | Adaptor-G+CAM667B
Black Pod Reversing Camera + 6 Pin PS/2 Adaptor Bundle Set to Replace Failed/Faulty Swift Motorhome RV66 Camera. Quality Sony 1/3" CCD image sensor fitted. Adaptor converts our 4 pin fly lead to the same 6 pin factory fitted wiring. Premium quality replacement from a family business who have supported the Motorhome community for close to two decades.
Compatible Replacement for Factory Fitted Black Pod RV66 Reversing Cameras on Swift/Autotrail/Bessacarr Motorhomes
For more than a decade we have supported the replacement of parts that fail on the Swift, Bessacarr, Autotrail reversing camera systems originally produced by Sargent Electrical. This listing is to replace the black pod single reverse camera, hidden behind a plastic moulding. See image below to see what the camera looks like looking at it through the trim.
We will supply the correct adaptors for this camera system to convert our 4 pin version in to their 6 pin PS/2 connector version. The adaptor cable has a fly lead coming off the connector. If your old camera had an orange wire that was connected to another lead (reverse trigger), then you must join the adaptors fly lead to the vehicle reverse trigger wire. If you do not need to connect the wire at the rear, you MUST put some insulation tape over this wire to avoid electric touching something it shouldn't (this sometimes becomes live when connected to the OEM 6 pin cable).
Both the camera and adaptor comes with full instructions. You can download PDF's in advance if you wanted to see what is involved before ordering.
Downloadable PDF files of camera fitting and adaptor guidance
 Click preview image to download the PDF file | Instructions for fitting our CAM667 Side View Vehicle Blindspot cameras Instructions on fitting and adjusting the side view blindspot cameras. |
 | Adaptor G for replacing Swift Autotrail Bessacarr Single Reversing Cameras Guide and safety advice |
Image Device:1/3 SONY 811 CCD 960H 700TVL
TV System: PAL
Effective Pixels: 976*582
Apect Ratio of output: 4:3
Scanning System: 2:1 Interlace
Sync. System: Internal
Resolution: 700 TV lines
Minimum Illumination:0 Lux (IR LEDs on)
Waterproof to Ip68
Infrared LEDs to provide night view
120-degree lens
Mirror image
Stainless Steel Bracket (painted)
Mainland UK Shipping
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM).
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM).
Highlands and Islands UK Shipping
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Outside of the UK Shipping
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.