RVM730 Compatible Bundle - 7" Bracket Mirror Monitor with Adaptor I - Replacement screen compatible with some Swift / Autotrail / Bessacarr motorhomes

Upgrade/Replace a RVM730 bracket to windscreen mirror monitor on Swift Motorhome. Compatible with the original Sargent Electrical supplied reversing camera systems that use the EM3.5 and EM5.0/EM5.6 boxes. Commonly seen on Swift, Autotrail, Bessacarr motorhomes. Fits original bracket, or order a new replacement bracket in the bundle.

  • No, Monitor with adaptor only
    Yes, I want a bracket to fit the twist off hex shaped mounting plate
    Yes, I want a bracket to fit the slide down V shaped mounting plate
    Bracket Required?: No, Monitor with adaptor only
  • £95
Qty:  
In stock (19 items available)

Monitor + Adaptor Bundle Set that allows our 7 inch rear view mirror monitor to replace the one installed on Sargent Electrical systems fitted to Swift / Autotrail / Bessacarr motorhomes

An Monitor and adaptor bundle, designed to upgrade/replace the RVM720 mirror monitor on Sargent Electrical reversing camera systems that use the EM3.5, EM5.0, and EM5.6 series boxes. Commonly seen on Swift, Autotrail, Bessacarr motorhomes. Our mirror monitor uses a slimline 8 pin plug, which then fits to our Adaptor I (converts to a PS/2 connector, which we have had pinned out to match Sargent's cabling).

Check out our video below to see our replacement mirror monitor attached to the original EM3.5/EM5.6 box that are fitted with this type of system.

Compatibility Warning for other models with similar connector

Please kindly note that other factories use the same 6 pin PS/2 connector on their monitors. This kit is ONLY designed for the standard Sargent Electrical supplied systems commonly fitted to Swift/Autotrail/Bessacarr motorhomes, it is unlikely to work (and could cause damage) if plugged in to any other factories 6 pin cabling.

Optional Bracket (if you already have a bracket monitor then the original will fit on to our monitor)

We can supply an optional bracket for this monitor to attach to the hexagonal bolt shaped mirror mounting plate usually found on these motorhomes. If you are replacing the factory mirror monitor, and already have a bracket, then you will just require the monitor only. If you are changing your monitor from a clip over type to the bracket to windscreen type then you will need to order the bracket option to do so.

We use an enhanced bracket mounting system, that is easier to install, and lower cost than the one originally supplied. We did used to sell the original type, but changed to the type shown below.

To see how easy the bracket is to fit to the windscreen, please see our YouTube video below.

  • 7” Colour LCD screen
  • Power supply: 12V/24V
  • Power Consumption: 8.64W or lower
  • Digital Screen Resolution: 800 x3(RGB)x480
  • Operating Temperature: -10C to +65C
  • 2 Inputs
  • PAL/NTSC/AUTO
  • Rotation/Mirror on both channels
  • Full function Remote Control

Mainland UK Shipping

We have three postage options to select from during checkout (on larger items eg kits there will be two options):

Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service.  They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders. 

DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM). 

DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM). 

Highlands and Islands UK Shipping

We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.

Outside of the UK Shipping

We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.  

We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.

60 day "Change of Mind" policy

We understand that for whatever reason you may need to return your purchase.  We provide a 60 day opportunity for you to do just that.  Simply give us an email or a phone call to let us know it is due back.  You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order.  We recommend getting a signed for or proof of postage when posting back to us.

All we ask is that you return the items in the condition they were sent in, with the packaging present.  You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.