Solder/Seal Red Crimp Butt Splice Connector - ACC1771
A connector that is suitable for areas exposed to the elements, only requires a heat gun and some wire strippers.
We decided to stock this new type of connection based on recommendations from a few of our customers. While we still lean towards using solder for our own connections, we've experimented with these and managed to create some robust and secure joints. These connectors come equipped with a solder ring inside that melts when exposed to heat from a heat gun. Additionally, the heat shrink material contracts to firmly seal the joint, and there's an inner layer of hot melt adhesive for added water resistance.
Here's how to use them:
- Slide the connector to one side of the two wires you want to connect.
- Strip approximately 1cm of insulation from both ends of the cable to expose the metal strands.
- Twist the metal strands from both wires together.
- Adjust the connector so that the solder ring is centered over the joint.
- Ensure that the heat shrink tubing will cover the entire joint.
- Gently heat the joint with a heat gun (remember to take precautions to prevent melting anything behind the joint). Make sure to evenly distribute the heat around the joint.
- Check the connection to ensure it's secure and that you can see the solder has melted across the metal strands inside the joint.
While we still prefer the traditional solder and adhesive-lined heat shrink method, these connectors might be a good fit for those who wish to avoid soldering.
Mainland UK Shipping
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM).
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM).
Highlands and Islands UK Shipping
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Outside of the UK Shipping
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.