Introducing our Black Twin Lens Rear View + Reversing Camera with Twin Input Digital Wireless Sender Box and 5" Wireless Receiver Monitor Display

Sony CCD Twin Lens Black Bracket Wireless Reversing + Rearview Caravan Camera Kit with 5" Display with Built in Wireless Aerial. Suction mount or bracket to dash options. Hardwire and 12V lighter socket provided. Two Year Guarantee from the specialists. Full support, quick service, friendly family UK business - Reversing Cameras UK Ltd. 60M long range digital wireless TX Sender Box for Twin Camera will cope with the longest outfits.

The system accepts the two images from our popular twin view rear view and reversing camera. It only sends one channel at a time to the monitor. The sender box has a blue trigger wire, which is designed to attach to the reverse light feed on your vehicle. When you select reverse, the system will switch to Channel 2, which you will fit the downward facing camera to. When you come back out of reverse, the system will revert back to Channel 1 (your driving camera).

Reliable Digital Wireless Technology - We have used the 60M digital wireless chip in our equipment for many years now. It has proven to be very reliable. Once paired, the twin rear view camera transmitter box and 5 inch wireless monitor will always stay linked with each other when in range. 

Great Image Quality - The Twin/Dual lens Rear View + Reversing Camera is fitted with two Sony CCD image sensors, which have a great reputation for image quality. The image sensor is the component of a camera that captures the image, it is the most important part in regards to giving you the best quality image. The 2x Sony 811 1/3" Sony CCD image sensors give good low light level sensitivity and colourful, high resolution images for the sender box to then send wirelessly to the display.

Built-in Aerial for Monitor - The 5" Wireless Monitor is fitted with a built in aerial and receiver. This means no need to find a hiding place for a receiver box. This also makes it easier to move the display between two vehicles, should you have more than one towing vehicle for a trailer/caravan.

Painted Stainless Steel Camera Bracket - Keep your camera looking good for many years to come thanks to the bracket being made from stainless steel. No rusty mild steel brackets to worry about. We started using stainless steel brackets for around a decade and a half, since then we never get anyone complaining about rusted/broken brackets. It is still relatively uncommon to find from elsewhere due to the cost/technical process for painting stainless steel. We also have the matt finish paint, as this provides even greater corrosion resistance and stays looking good for longer compared to gloss finishes.

60M Range - Customers are always surprised by the range of this wireless reversing camera system. Some customers who have caravans/trailers have driven away from the camera and mentioned how far they could drive before they lose signal with each other. The general consensus with wireless cameras is to look for range that is double the distance between camera/monitor i.e. if you have a 8M Caravan and a 5M car, you would want a minimum of 26M range wireless. We used to supply 40M range systems in the past, and this was ample for everyone, so the 60M sets are absolutely no worries.

IR Night Vision - This Twin/Dual lens Rear View + Reversing Camera is fitted with Infra-Red (IR) Night Vision LED's. This means that in pitch black conditions, the rear of the vehicle will be lit up with light only the camera can see. What this means is that the camera will NOT blind following vehicles with light, but WILL be able to see in the dark using the light. IR light is below the visible spectrum of the human eyes, but in the spectrum of the cameras image sensor.

12V/24V Suitable For All Vehicles - This wireless reversing camera kit can operate on either 12V vehicles such as car/van/trailer/caravan, or 24V vehicles such as HGV/LGV/Truck. One thing we would like to mention is that most modern cars/vans rear lights are fitted with CANBUS. If you try to power the camera from a rear light on one of these vehicles you might find the power cuts to the camera due to this. It is rare still to see CANBUS on caravans/trailers, where most people use a side light supply to power the camera.

No Static / Secure Connection - Being digital, this wireless system operates like a Wifi network - encrypting information and securely linking together. The signal is actually converted to an MP4 codec, which is played back with minimal delay (less than a tenth-of-a-second). Because the two parts are paired together, the system knows what it can ignore, meaning the system does not suffer from snowy static interference of the older analogue wireless. 

Suction Mount / Choice of Brackets - As standard a temporary mounting suction mount bracket is supplied with this kit. It is a very sturdy mount, which securely holds the monitor for long periods of time. Having said that, suction mounts are never "for life", and will require being re-made regularly. If you are intending to mount permanently we would recommend you choose the dash mount bracket option, which will come with an adhesive mount quick release dash bracket to stick to the dashboard.

Two Year Guarantee - We guarantee all parts of your new wireless reversing camera system will be free from factory defects for a period of 2 Years. We endeavour to support your purchase beyond this with spare parts where available.

Hardwire or 12V Lighter Plug - This system comes with BOTH a 12V Lighter Plug and traditional Red (Positive) and Black (Earth) Bare Wires for Hardwiring.

Who should choose a wireless reversing camera?

Caravans, articulated lorries, horsebox trailers, and other trailers are prime candidates for wireless camera systems as it solves the problem of getting the signal between the two sections. We don't recommend using wireless on modern cars/vans due to the sensitive CANBUS electrics on the rear lights (most common place people look to power wireless cameras). CANBUS will most likely will cut power when they detect the unusual draw of power from a wireless camera/transmitter - you can get around this with relays but that negates the selling point of ease of install. For customer with modern cars/vans we recommend using our cabled/wired reversing camera systems, as the monitor powers the camera instead of the rear lights - thus avoiding CANBUS issues. 

For more information including fitting instructions and technical specification please click the relevant tabs on this page. If you would like any information/questions that may not be present, please contact us.