White Dome Reversing Camera for Motorhomes and Vans - 1/3" Sony CCD 700TVL sensor | CAM070W/CAM069W
The dome cameras are popular with people who want a neat and tidy looking camera on the back of their rear wall/doors. The image sensor fitted is a very high spec 700TVL 1/3" Sony CCD image sensor. IR LEDs coupled with the high performance sensor means the camera will perform well in low light level conditions. The camera comes with a 45cm fly lead with a 4 pin aviation connector at the end, extension cables and adaptors (for some connector types) are available.
The dome reversing camera is a popular alternative for people who wish to have a more rounded aesthetic looking camera to the back of their motorhome or van.
This camera is fitted with the very respectable Sony 811 1/3" CCD 700TVL image sensor. It is our top choice for standard definition camera systems.
The camera is fitted with night vision IR LED's, which work very well with the low light level 1/3" Sony CCD image sensor fitted.
The dome camera comes with a gasket that is pre-cut to match the base of the camera, to help with fitting and sealing. There is also a pre-fitted rubber grommet installed on the cable for entry in to the vehicle body.
The reverse view camera can either be angled to face downwards for general parking/reversing, or angled to look back down the road as an always on driving camera.
You can choose whether to have RCA connectors or 4 Pin connectors when ordering.
The 4 pin connector option is equipped with a 45cm fly lead that has a 4-pin screw connector, also known as an aviation connector. This type of connector is preferred for its waterproof properties, thanks to the mechanical seal created by a rubber O-ring when the screw locking collar is tightened. It ensures a secure and reliable connection. See the 4 pin aviation extension cables category for compatible cables.
The RCA Phono connector option is equipped with a fly lead that has a yellow RCA/Phono socket fitted for video signal, and a 2.1mm/5.5mm DC socket for power. An adaptor lead is provided that inserts in to the DC socket and terminates in a red (+12V) and black wire (earth). See both the RCA Phono extension cables category and DC extension cables category for compatible cabling.
PDF Instructions
We aim to provide as much information as possible to assist with both the installation and use of our equipment (something we here is very rare nowadays). If you require any further assistance with any aspect of the fitment then please contact us. Also, if you feel anything could be added to our instructions or a sticker produced for the box to assist in guidance, please let us know. We get better with your assistance.
 Click preview image to download the PDF file | General 4 Pin Camera Installation Guide This guide includes adapting the 4 pin reversing cameras to phono RCA in applications such as stereo headunits. |
Technical Specs
Please see the technical specifications for the product below:
Image Device:1/3 SONY CCD 811 960H
TV System: PAL
Effective Pixels: 976*582
Scanning System: 2:1 Interlace
Sync. System: Internal
Resolution: 700 TV lines
Minimum Illumination:0 Lux (IR leds on)
Video Output:1.0vp-p,75Ohm
Gamma Consumption: 0.45
AGC: Auto
S/N Ratio: Better than 48dB
White Balance: Auto
Electronic Shutter: 1/50Sec-12.5μSec (PAL)
BLC: Auto
Current Consumption:100mA
Waterproof to Ip68
Infra red LEDs to provide night view
Mirror image
Mainland UK Shipping
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM).
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM).
Highlands and Islands UK Shipping
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Outside of the UK Shipping
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.