Sony CCD Compact Black Reversing Camera Kit with 7" Monitor | PM66B-SD

Compact-sized Sony CCD Bracket Reversing Camera with Black Painted Stainless Steel Bracket. 12V/24V input, 700tvl 1/3" Sony CCD image Sensor, High-Resolution High-Quality Display, Adjustable and Removeable Guidelines. High Quality System for a low price. 2 Year Guarantee, Fast Dispatch, and Lifetime Support.

  • £182
  • including VAT
Qty:  
In stock (30 items available)

About our Sony CCD Compact Black Reversing Camera Kit with 7" Monitor

Compact-sized Sony CCD Bracket Reversing Camera with Black Painted Stainless Steel Bracket. 12V/24V input, 700tvl 1/3" Sony CCD image Sensor, High-Resolution High-Quality Display, Adjustable and Removeable Guidelines. High Quality System for a low price. 2 Year Guarantee, Fast Dispatch, and Lifetime Support.

High Resolution Sony CCD Camera Image Sensor Fitted - This reverse camera is fitted with a high resolution Sony 1/3" CCD 700tvl Image Sensor. The image sensor collects colour/light information to transmit to a display, so as you can imagine it is possibly the most crucial component for great image quality. This camera will give great colour replication and a sharp image.

High Resolution Image Quality - Our 7 inch stand/dash mount monitor display gives a good quality image thanks to it's 800x480 pixel digital hi-res LCD panel. This resolution can handle even the highest resolution of traditional CVBS signal reversing cameras (CVBS signal still makes up 95%+ of all existing reversing camera systems). Numbers can be misleading, as we have seen lots of poor quality panels with the same resolution, but with poor performance. Trust us, check out the photos customers have sent in, then make your decision with the knowledge that you are buying from a long established, trusted, reputable firm who keep things consistent, and support their customers for life.

Anti-Rust Black Painted Stainless Steel Bracket - We have used stainless steel brackets for most of our bracket cameras for over a decade. Since doing so, we have yet to have anyone ask for a replacement bracket due to rust. Stainless steel is difficult/costly to paint, which is why so few factories and sellers will offer them. Due to our buying power and ability to sell so many units at a low price, the manufacturers we work with are able to customise and stock painted stainless steel brackets for our orders. Keeping your camera and motorhome looking in top condition for as long as possible.

Night Vision IR LED's - This camera is fitted with 6x IR Night Vision LED's. This provides the camera with light at night time. Don't worry, this is not visible to humans and will not blind your fellow motorists travelling behind you. The light is below the human eyes visible spectrum, but within the cameras. This means you will experience good night vision when the outside light level drops. 

IP68 Waterproof Camera - Enough to cope with the worst of the weather we see here in Great Britain. You can expect this camera to work well throughout the year. Even the 4 pin connection can be left outside, since this is fitted with a rubber o ring that compresses and seals the joint when the screw locking ring is tightened.

Compact Size Camera - The 58mm wide compact camera is the "little brother" of our regular 78mm width version. It might not sound much in numbers, but when the two are placed side by side, there is a considerable difference when comparing this camera to a regular sized camera.

Flexible Mounting Positions - You can either mount this on a vertical surface e.g. Motorhome rear wall, on top of a horizontal surface e.g. top of roof/door, or below a horizontal surface e.g. below a bar/spoiler.

Time Proven Durable and Reliable Camera - Like most of our cameras, this has proven itself to be very reliable over many years of service. Buy with confidence that you can expect a very long service life from this camera, with the excellent quality image it generates.

Advanced Menu System - A lot of reversing camera displays have very basic functions, usually just the colour/contrast/brightness. This menu system has the ability to add guidelines, number the guidelines with a distance, choose to say if the measurement is displayed as M or Ft, individually change settings for each channel e.g mirror one channel but not the other, and set interval mode so the monitor flicks between both channels at a set number of seconds. We don't just leave you to figure things out yourself, we issue a booklet to guide you through all of the functions, why not read it before you purchase by heading to the PDF instructions tab of this listing. We are about keeping long term products, consistency, and support for life, which includes providing detailed support material such as this.

Ability to Add Guidelines to Image in Reverse - You can set the monitor up so that it displays guidelines when you select reverse gear. These lines can be adjusted in width, and along both the vertical axis and horizontal axis. Numbers can be added, and choice of imperial or metric measurements. See pages 5 to 6 of our comprehensive instruction manual for the 7 inch reversing camera monitor for more details on the guidelines.

Increases Reversing Safety - Most importantly, a reversing camera will decrease your blind spots therefore improving your visibility and awareness of surroundings whilst reversing. In the UK almost a quarter of all accidents occur whilst in reverse. Fit our good quality reverse camera now to help reduce the likely of damage to your vehicle, other property or to other pedestrians/cyclists.

Two Year Guarantee and Lifetime Support - This monitor and camera should last a very long time without any issue. We guarantee it to be free from faults for two years. After two years we are able to offer attempted low cost monitor repairs to keep your system in good condition and avoid extra time or expense installing all new components. We also keep good stock of spare parts such as wiring harnesses should you decide to take the monitor out of the vehicle with you when you sell your vehicle but leave the wiring where it is.

Alternative bracket options - The monitor has a rear channel that allows our alternative monitor brackets to be installed. This choice includes quick release, ceiling mount, heavy duty, and temporary suction mount brackets. You can choose to add a discounted price bracket with this monitor using the drop down selection box menu - see monitor bracket options tab for more details on each type.

For more information including main reversing camera kit instructions, and monitor instructions, please click the tab for PDF instructions. If you would like any information/questions that may not be present, please contact us.

Cable Length Options

This drop down menu allows you to select the length of cable that goes between the camera and the monitor wiring harness. When choosing cable length, please be aware that there is between 2-3M length supplied with the monitor wiring, whilst the reversing camera has another approx. 0.5M. We use quality pure copper 4 pin screw locking connector cables to ensure a long lasting, stable picture. 

What Length Should I select?

5M (16ft) - Ideal if you have a very small vehicle e.g. a car or compact van.

7.5M (24ft) - Recommended for large cars, 4x4, and some smaller vans.

10M (32ft) - Most popular length for standard sized vans.

12.5M (41ft) - Most popular length for Motorhomes and larger vans.

15M (49ft) - Ideal for large Motorhomes and HGV/LGV.

20M (65ft) - Fits very large vehicles e.g. HGV, Coaches, and LGV.

8mm Disconnect Link

We are able to offer a small disconnect 8mm point on our 10M/12.5M/15M cable lengths. This is located 100cm from the front side of the cable (next to the monitor). This means you can run the cable through tight gaps/cupboards/bulk heads with just a small 8mm hole/gap required, reconnecting the larger connector once you have your cable next to the monitors wiring harness.

2010+ Dometic/Waeco Cable Adaptors

We often see motorhomes pre-fitted with the 2010+ Dometic/Waeco cable. Most commonly this is seen on Baileys, Burstner, and Hymer motorhomes, although has been found on a wide assortment of others too. See the photo below for an image of what this type of cable looks like.

If you choose the option for the adaptors then you will receive an adaptor to place on both sides of your existing cable (we won't give you a long cable). Essentially this turns your existing pre-fitted cable in to one of our 4 pin cables. See photo below of the pair of adaptors you will receive.

Additional Monitor Bracket Options

To add a discounted price additional monitor bracket to your product bundle, please see the descriptions/photos below.  We also have a YouTube video showing the various bracket options below.


ACC035 - "Butterfly" Bracket option

So called because the base looks like a pair of butterfly wings. Fitted with an adhesive pad on the base, peel the protective layer off and stick to your clean dashboard. Additional screws can be used if you feel it needs reinforcement. The square nut fits in to the channel of your monitor, whilst there is a screw to the rear of the bracket that will then screw in to the square washer until it locks the two together.

ACC041 Quick Release Bracket option

The quick release bracket is one of the most popular bracket options. The bracket has a removable mounting plate that attaches to the rear channel of the monitor. This plate can then slide in to the bracket that is mounted to the dashboard and locks. To release, simply pull back the thumb switch at the rear, then slide the monitor up and out. Our monitors have disconnect points around a foot away from the monitor to allow it to disconnect. A bracket that makes initial install a little quicker, as well as allowing more adjustability in positioning of the display. Adhesive pad base for sticking to clean dashboard with bendable feet.

ACC705B - Heavy Duty Rear Mount Bracket Option

The most sturdy of all of our rear mounted dash mounts, all metal design. Monitor slides on to the bracket, which has a rear adjustment rotational wheel to lock the monitor to the bracket. Self adhesive base, with bendable "feet" for curvy dashboards. You can add screws if required.

ACC038 - Suction Mount Bracket Option

Only designed for temporary mounting eg. moving a monitor from one vehicle to another. This bracket has strong suction, people are often shocked by how strong it is. We use these when we road test new monitors for temporary mounting. A ball joint allows for good adjustment to give the monitor the optimum viewing angle.

ACC20540 - "Banana" Ceiling Mount Swan Neck Bracket Option

The ceiling mount bracket is a very sturdy and adjustable bracket mount for the monitor in this kit. Two screws secure this to the ceiling or plastic trim of the vehicle. The other side attaches to the channel on the back of the monitor and secures with a twist of the locking wheel. Release the tension by turning the hand screw knob on the left to allow the ball joint to rotate clockwise and anticlockwise, or up/down/left/right. These have been a very popular option since they were introduced.

Power Connection Options

You have the option to add additional leads that plug in to a DC socket on the monitor wiring harness. You will always be supplied with the standard power wire, which gives you a red wire and a black wire to solder / crimp to a power supply.

On the drop down menus you will notice there are two options selectable. One to add a lighter plug, one for a fuse tap. Scroll down for details on each option.

Lighter Plug 

Selecting this option adds an additional lighter plug lead - attaches to a socket on the end of the 300cm monitor wiring loom/harness. Some people order this option just to try out there new kit before hardwiring permanently.


Fuse Tap (Mini blade, Standard blade) 

Selecting this option adds an additional easy-wire fuse tap lead with built in earth terminal connector. 

We designed and had this product produced in 2023, and they have been very popular. We wanted to create something that meant our customers could hardwire a reversing camera system to their vehicle with ease and minimal tools. Fuse taps have already become popular for installing dash cams, so we wanted to make them more popular for reversing camera kits too. 

Usually fuse taps have no earth terminal connector and require crimp tools to connect to your wiring - our easy wire fuse tap kits are different. They come supplied with 2M of twin wire (power + earth) attached. The wires can be pulled apart should you wish to earth to an area far from the fuse box.

Choose a fuse that's active when the ignition is on. Remove the original fuse and place it in the empty slot of the fuse tap. The correct rated fuse for the new camera system is supplied already installed in the correct slot. Install the fuse tap (with the two fuses fitted) in to the fuse box (where you removed the original fuse). Lastly, connect the earth terminal to a chassis bolt or screw (or add a new bolt/screw to secure it).

The mini blade is the most commonly seen fuse size on modern vehicles.

Standard blade used to be the most common fuse size installed, and is still commonly seen, even on very recent vehicles.


Technical Specification

Vehicle Monitor Display

7” Colour LCD screen
Power supply: 12V/24V
Power Consumption: 4W Max
Digital Screen Resolution: 800 x3(RGB)x480
Contrast: 500:1
Brightness: 400cd/m2
Viewing Angle: U: 50 degrees/ D: 60 degrees, R/L: 70 degrees
Operating Temperature: -10C to +65C
Storage Temperature: -30C to +80C RH90%
2 Inputs
PAL/NTSC/AUTO
Mirror/Normal Switch on both channels
Full function Remote Control

Reversing Camera

Image Device:1/3 SONY 811 CCD 960H 700TVL
TV System: PAL
Effective Pixels: 976*582
Scanning System: 2:1 Interlace
Sync. System: Internal
Resolution: 700 TV lines
Minimum Illumination:0 Lux (IR leds on)
Video Output:1.0vp-p,75Ohm
Gamma Consumption: 0.45
AGC: Auto
S/N Ratio: Better than 48dB
White Balance: Auto
Electronic Shutter: 1/50Sec-12.5μSec (PAL)
BLC: Auto
Current Consumption:100mA
Waterproof to Ip68
Infra red LEDs to provide night view
Mirror image only
Stainless Steel Bracket (painted)

PDF Instructions

We aim to provide as much information as possible to assist with both the installation and use of our equipment (something we here is very rare nowadays). If you require any further assistance with any aspect of the fitment then please contact us. Also, if you feel anything could be added to our instructions or a sticker produced for the box to assist in guidance, please let us know. We get better with your assistance. 


Click preview image to download the PDF file
General Kit Installation instructions
Our main 4 pin reversing camera kit instructions. We prefer 4 pin screw locking connector cables in our kits for numerous reasons (no canbus issues, stable voltage, ability for always on, reliability, and heavy duty connectors). This downloadable PDF file will give you all the advice you will need



Click preview image to download the PDF file
MON16/MON745 7 Inch High Resolution  Monitors 
If you choose the PM60 series kits you will have the MON16/MON745 monitor supplied, which is covered by these instructions. They will guide you through the various menu functions including rotation, adjustable guidelines, trigger delays, interval mode, and display settings.


If you are ordering the Mini Bade or Standard Blade Fuse Tap power option, then please see the further instruction sheet below dealing with this time saving connection method.

Instructions for fitting Fuse Taps / Piggyback fuse holders for power supply 
Our guide on how to correctly install a piggyback fuse holder tap to power a reversing camera system from the fuse box.

Mainland UK Shipping

We have three postage options to select from during checkout (on larger items eg kits there will be two options):

Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service.  They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders. 

DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM). 

DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM). 

Highlands and Islands UK Shipping

We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.

Outside of the UK Shipping

We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.  

We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.

60 day "Change of Mind" policy

We understand that for whatever reason you may need to return your purchase.  We provide a 60 day opportunity for you to do just that.  Simply give us an email or a phone call to let us know it is due back.  You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order.  We recommend getting a signed for or proof of postage when posting back to us.

All we ask is that you return the items in the condition they were sent in, with the packaging present.  You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.